To catalogue
ENYDYNE® H 68233
ENYDYNE® H 68233 - Unsaturated polyester resin in styrene,DCPD. It is used as general purpose in hand lay up and spray up method.
Product families
Applications
Industrial — Chemical & Industrial Manufacturing
- Equipment & Parts
Industrial — Oil, Gas & Mining
- Refining & Gas Processing
Industrial — Power, Water & Utilities
- Power & Utilities
- Renewable Energy
Product Families
Composite Materials — Polymers & Resins
- Thermoset Resins
Other characteristics
- Brand
- ENYDYNE
- End Uses
- Pipes, Tanks
- Polymer Name
- Polyester (unspecified)
- Processing Methods
- Hand Lay-up, Spray Lay-up
- Markets
- Industrial
- Shelf LIfe
- 9 Months (23°C in Dark )
- Technology
- Composite Materials
- Application Methods
- Spray
- Composites End Use
- Pipes
- Tanks
- HIGHLIGHTS
- High reactivity
- Medium viscosity
- Handling
Store in the shade, out of direct sunlight; Keep storage temperature below 25°C; Unseal container just before use; Shelf life will be reduced reaching higher temperature
- Composite Materials Functions
- Resins Binders & Matrix Materials
- Composites Processing Methods
- Hand Lay-up
- Spray Lay-up
Technical data
Table 1 of 2
6 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Solid Content | 67 - 71 | % | MT-CU001C |
| Specific weight at 20°C | 1,11 | g/cm3 | — |
| Brookfield Viscosity at 23°C, sp 2 rpm 50 | 380 - 480 | mPa.s | MT-CU023V |
| Gel Time at 23°C + 1,2% Co 1% + 1,5% MEKP50 | 10:30 - 13:30 | minutes | MT-CU152R |
| Peak at 23°C + 1,2% Co 1% + 1,5% MEKP50 | 17 - 23 | minutes | MT-CU152R |
| Exothermic peak at 23°C + 1,2% Co 1% + 1,5% MEKP50 | 140 - 160 | °C | MT-CU152R |
Table 2 of 2
6 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile strength at 40°C for 16h/ +2h for 90°C | 45 | MPa | ISO 527 (2012) |
| Tensile Modulus at 40°C for 16h/ +2h for 90°C | 2734 | MPa | ISO 527 (2012) |
| Flexural strength at 40°C for 16h/ +2h for 90°C | 85 | MPa | ISO 178 (2011) |
| Flexural modulus at 40°C for 16h/ +2h for 90°C | 2498 | MPa | ISO 178 (2011) |
| HDT at 40°C for 16h/ +2h for 120°C | 74 | °C | ISO 75 -2A (2013) |
| Elongation at break at 40°C for 16h/ +2h for 90°C | 6,81 | % | ISO 527 (2012) |
