To catalogue
BMCarbon® 70CF45-12mm
BMCarbon® 70CF45-12mm - Bulk molding compound based on Epoxy resin and reinforced with carbon fibers designed for compression molding technology. These materials with a potential weight reduced and a freedom high design enter different areas for structural application where high mechanical properties are requested.
Product families
Applications
Automotive & Transportation — Automotive
- Chassis & Brake
- Exterior & Body
- Interior
- Powertrain & UTH
Industrial — Chemical & Industrial Manufacturing
- Equipment & Parts
Industrial — Oil, Gas & Mining
- Refining & Gas Processing
Industrial — Power, Water & Utilities
- Power & Utilities
- Renewable Energy
Automotive & Transportation — Transportation
- Aerospace & Aviation
- Marine
- Rail & Mass Transit
Product Families
Composite Materials — Prepregs & Molding Compounds
- Bulk Molding Compounds (BMC)
Other characteristics
- Brand
- BMCarbon
- End Uses
- Pipes, Tanks
- Functions
- Molding Compound
- Reinforcement Material
- Carbon Fibers
- Markets
- Automotive & Transportation
- Industrial
- Technology
- Composite Materials
- Packaging Type
- Bags
- Cartridges
- Composites End Use
- Pipes
- Tanks
- Material Features
- Good Mechanical Properties
- Handling
Store the product in its original sealed packaging at -18°C. Leave product to reach room temperature before use, to prevent condensation. The usual precautions when handling uncured synthetic resins and fine fibrous materials should be observed, and a Safety Data Sheet is available for this product. The use of clean disposable inert gloves provides protection for the operator and avoids contamination of material and components
- Composite Materials Functions
- Molding Compound
Technical data
Table 1 of 1
10 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Density at 4h at 200°C | 1.5 | g/cm | ISO 1183 A |
| Shrinkage at 4h at 200°C | 0 | % | ISO 2577 |
| Flexural Strength at 4h at 200°C | 185 | N/mm2 | ISO 14125 |
| Flexural Modulus at 4h at 200°C | 16500 | N/mm2 | ISO 14125 |
| Tensile Strength at 4h at 200°C | 65 | N/mm2 | ISO 527-4 |
| Tensile Modulus at 4h at 200°C | 23000 | N/mm2 | ISO 527-4 |
| Impact Strength at 4h at 200°C | 30 | KJ/m2 | ISO 179 |
| Heat Distortion Temperature at 4h at 200°C | min. 200 | °C | ISO 75-2 |
| Glass Transition Temperature (Post cured 4h at 200°C) | 165 | — | — |
| Glass Transition Temperature | 145 | — | — |
