To catalogue
Polynt Group HUP 16/18 RS-7035
Polynt Group HUP 16/18 rs-7035 is generally used in building and construction, electronic and electrical applications.
Product families
Applications
Applications
- Consumer Goods — Appliances & Electronics
Building & Construction — Building Envelope & Roofing
- Glazing & Window Elements
- Shingles & Tiles
Building & Construction — Building Materials
- Fence Decks & Rails
- Interior Fixtures
- Pipes & Plumbing
- Siding & Trim
- Structural Components
- Wall Panels
Building & Construction — Infrastructure, Roads & Paving
- Pavement Highways Roads & Bridges
Electrical & Electronics — Parts & Components
- Housings & Enclosures
- Printed Circuit Boards (PCBs)
Automotive & Transportation — Transportation
- Rail & Mass Transit
Product Families
Composite Materials — Prepregs & Molding Compounds
- Sheet Molding Compounds (SMC)
Other characteristics
- Functions
- Molding Compound
- Markets
- Automotive & Transportation
- Building & Construction
- Consumer Goods
- Electrical & Electronics
- Technology
- Composite Materials
- Handling
- Storage condition store dry at max
- 25 °C and out of direct sun light
- Molding time 30 sec
- /mm
- Molding pressure > 70 bar
- Molding temperature 135 - 145 °C
- Composite Materials Functions
- Molding Compound
Technical data
Table 1 of 1
18 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Surface Resistance | 10^13 | Ohm | IEC 93 |
| Shrinkage | 0,11 | % | ISO 2577 |
| Water absorption | 0,30 | % | ISO 62 |
| Flexural modulus | 8 | N/mm2 | ISO 14125 |
| fibre length | 25 | mm | DF PA3.01 |
| tracking resistance | CTI 600 | level | IEC 112 |
| volume resistance | 1014 | Ohm x cm | IEC 93 |
| fibre Content | 18 | % | ISO 1172 |
| Tensile strength | 45 | N/mm2 | ISO 527-4 |
| dielectric strength | 20 | KV/mm | IEC 243-1 |
| surface weight | 4.7 | g/m2 | ISO 10352 |
| Curing Time | 45 | sec | ISO 12114/1 |
