ARMORCOTE® 966 NEUTRAL BASE
Armorcote® 966 Neutral Base is metallic gel coats are used in passenger, camper, utility, and recreation vehicles, decorative structural components, and for marine vehicle surfaces above the water line Not recommended for water immersion service . Armorcote® 966 series is polynt composites’ best system for weathering resistance in a metallic gel coat armorcote® 966 series meets the EPA national emission standards for hazardous air pollutants NESHAP for both marine manufacturing and reinforced composites production.
Product families
Applications
- Rail & Mass Transit
Product Families
- Gelcoats & Topcoats
Other characteristics
- Brand
- ARMORCOTE
- Functions
- Surface Finish
- Markets
- Automotive & Transportation
- Technology
- Composite Materials
- Product Safety
Metallic gel coats may contain aluminum pigments. Precautions of aluminum pigment-containing products must be exercised. Wearing gloves is recommended when working with these products. Small spills and drops should be cleaned immediately before the concentrate contaminates and spreads in the working area. All equipment should be well grounded. Chlorinated solvents in contact with aluminum can cause an explosion; refrain from cleaning the metallic spray equipment with such solvents.
Technical data
Table 1 of 1
8 rows| Characteristic | Value | Unit |
|---|---|---|
| Viscosity (77°F) | 14500 | cps |
| Thixotropic Index (77°F) | 5.5 | — |
| Weight per Gallon (77°F) | 10 | lbs |
| Flash Point (77°F) | 79 | °F |
| Gel Time (77°F) | 15.5 | minutes |
| Lay-up Time (77°F) | 67.5 | minutes |
| Sag Resistance (77°F) | Good @ 24 mils wet | — |
| Hide (77°F) | Normally complete @ 10 mils | — |
