IRASORB LM002
IRASORB LM002 is a non-toxic, Sb-free combination of metal oxides designed as highly efficient Laser Marking Additive for Polymers
Properties
- Physical Form
- Powder
- Solid
Product families
Applications
- Electrical & Electronic Systems
- Automotive Electronics
Product Families
- Performance Additives
Other characteristics
- Brand
- IRASORB
- End Uses
- Fuse Box
- Functions
- Laser Marking Additive
- Labeling Claims
- Lead-free, Non-Toxic
- Lead-free
- Non-Toxic
- Compatible Polymers & Resins
Acrylonitrile Butadiene Styrene (ABS), Linear Low Density Polyethylene (LLDPE) , Polyamides, Polybutylene Terephthalate (PBT), Polycarbonates (PC), Polypropylenes (PP), Polyvinyl Chloride (PVC), Thermoplastic Polyurethane (TPU)
- Markets
- Automotive & Transportation
- Electrical & Electronics
- Features
LDS additives have a double function – they work as a laser marking additive and as a catalyst for the metallisation process.. The specific advantages of the StanoStat additives are their light colouration and high stability.
- Appearance
- Light yellowish powder
- Technology
- Plastics
- Material Features
Abrasion Resistant; Good Environmental Stress Crack Resistance (ESCR); High Optical Transparency; Non-Toxic
- HIGHLIGHTS
Laser marking produces permanent and indestructible marks on plastic surfaces, and these permanent marks offer many advantages over other markings. To name just a few: improved quality control, brand protection against product piracy, and stability against environmental impact.; Laser marking is a very flexible technology, suitable for high volume products, as well as for small lot sizes. The abrasion resistant laser marks can be applied on soft or hard surfaces, and even on surfaces which are not flat. Marking in all 3 dimensions is possible.; Whether it is for technical applications like bar codes and lot numbers, or for decorative purposes, the laser marking process is a good choice for those looking for a lasting solution.; However, not all polymers mark the same way. Some polymers like PE or PP are almost transparent for the typically used near infrared lasers with a wavelength around 1064 nm. Others, for example, PC, interact easily with NIR laser light without any additives.; As a result, the use of laser marking additives is necessary in many polymers to achieve a good laser marking result.
- Storage Recommendation
- Keep away from direct sunlight.
- Certifications and Compliance
- ISO 14001
- ISO 50001
- ISO 9001
- Compatible Polymers and Resins
- Acrylonitrile Butadiene Styrene (ABS)
- Linear Low Density Polyethylene (LLDPE)
- Polyamides
- Polybutylene Terephthalate (PBT)
- Polycarbonates (PC)
- Polypropylenes (PP)
- Polyvinyl Chloride (PVC)
- Thermoplastic Polyurethane (TPU)
- Plastics and Elastomers End Uses
- Fuse Box
- Plastics and Elastomers Functions
- Laser Marking Additive
Technical data
Table 1 of 1
7 rows| Characteristic | Value | Unit |
|---|---|---|
| Bulk Density | 1200 - 1400 | g l^-1 |
| Tap Density | 1900 - 2200 | g l^-1 |
| Color Measurements (L) | min. 90 | — |
| Color Measurements (b) | 15 - 20 | — |
| Surface Area | 1.5 - 2.0 | m² g^-1 |
| Particle Size (D50%) | 10 - 15 | μm |
| Thermal Stability | min. 350 | °C |
