To catalogue
POLYFIL GTL-3
POLYFIL GTL-3 is a product that functions as a foaming agent. It is compatible with various polymers and resins, including polyethylene terephthalate (pet), high-density polyethylene (HDPE), polylactic acid (pla), polypropylenes (PP), polycarbonates (PC), and acrylonitrile butadiene styrene (abs). The recommended processing methods are blow molding, injection molding, and extrusion with a resin-based carrier using high-density polyethylene (HDPE).
Properties
- Physical Form
- Masterbatch
- Solid
Product families
Plastics — Masterbatches
- Additive Masterbatches
Plastics — Polymer Additives
- Processing Aids
Other characteristics
- Brand
- POLYFIL
- Carrier
- High-Density Polyethylene (HDPE), Resin-based
- High-Density Polyethylene (HDPE)
- Resin-based
- Functions
- Foaming Agent
- Processing Methods
- Blow Molding, Extrusion, Injection Molding
- Compatible Polymers & Resins
Acrylonitrile Butadiene Styrene (ABS), High-Density Polyethylene (HDPE), Polycarbonates (PC), Polyethylene Terephthalate (PET), Polylactic Acid (PLA), Polypropylenes (PP)
- Use Levels
- 1.0 - 2.5%
- Technology
- Plastics
- Resin Recommendation
- HDPE
- PP
- ABS
- PC/ABS
- PLA
- PET
- Certifications and Compliance
- ISO 14001
- ISO 45001
- ISO 9001
- Compatible Polymers and Resins
- Acrylonitrile Butadiene Styrene (ABS)
- High-Density Polyethylene (HDPE)
- Polycarbonates (PC)
- Polyethylene Terephthalate (PET)
- Polylactic Acid (PLA)
- Polypropylenes (PP)
- Plastics and Elastomers End Uses
- Foams
- Plastics and Elastomers Functions
- Foaming Agent
- Plastics and Elastomers Processing Methods
- Blow Molding
- Extrusion
- Injection Molding
Technical data
Table 1 of 1
3 rows| Characteristic | Value | Unit |
|---|---|---|
| Starting LDR | 50:1 | — |
| Density | approx. 1.120 | g/cm3 |
| Melt Index | approx. 4.00 | g/10 min |
