To catalogue

POLYCOR® M1 SP

POLYCOR® M1 SP - Fire retardant gel coat. Fire & smoke properties (NF P 92-507): M1F3 (Official approval - Available upon request) Available in a wide range of colors and may be color matched on request.

Product families

Applications

Building & Construction — Building Envelope & Roofing
  • Glazing & Window Elements
  • Shingles & Tiles
Building & Construction — Building Materials
  • Fence Decks & Rails
  • Interior Fixtures
  • Pipes & Plumbing
  • Siding & Trim
  • Structural Components
  • Wall Panels
Building & Construction — Infrastructure, Roads & Paving
  • Pavement Highways Roads & Bridges
Automotive & Transportation — Transportation
  • Rail & Mass Transit

Product Families

Composite Materials — Surface Finishes
  • Gelcoats & Topcoats

Other characteristics

Brand
POLYCOR
Color
Custom
Functions
Surface Finish
Cure

It is recommended to recheck the gel time in the customer's plant because age, temperature, humidity and catalyst will produce varied gel times.

Markets
  • Automotive & Transportation
  • Building & Construction
Technology
Composite Materials
Application Methods
Spray
Handling

Uncatalyzed, this gel coat has a usage life of 120 days from date of manufacture when stored at 23°C or below in a closed, factory-sealed, opaque container, and out of direct sunlight. The usage life is cut in half for every 15°C over 23°C. Totes of product can have even shorter usage life (66% of the drum shelf life mentioned above).

Recommended Applications

Industrial parts, electrical parts, transportation parts requiring improved fire performances. This gel coat was designed for internal parts only.

Composite Materials Functions
Surface Finish

Technical data

Table 1 of 1

11 rows
CharacteristicValueUnit
HideCompleted at 300 microns—
Specific Gravity at 25 °C1.52 ~ 1.58g/cm3
Viscosity at 25°C (Brookfield RVF, spindle No.4 at 4 rpm)16,000 ~ 19,500mPa.s
Thixotropic Index (2/20 rpm) (Brookfield RVF, spindle No.4, speeds 2 & 20 rpm)6.5 ~ 7.5—
Solid Content71 ~ 76%
Reactivity Catalyst system1.8 pbv of MEKP-925—
Reactivity Resin quantity100g—
Reactivity Gel Timemin. 10 - 14—
Reactivity Film cure (500 microns)min. 40 - 50—
Reactivity Temperature25°C
Flash Point31°C

The Omnichem website uses cookies. By continuing to use the site, you consent to their use in accordance with our Privacy Policy and to the collection of analytics.