To catalogue
POLYCOR® LSC NPG FLEX PA WHITE 9199
POLYCOR® LSC NPG FLEX PA WHITE 9199 - A pre-accelerated gel coat base on unsaturated polyester resin. It is cured using MEKP peroxide.This high performance gel coat is formulated for use in sanitary and marine applications or GRP application where resistance to water and blistering are needed.
Product families
Applications
Automotive & Transportation — Transportation
- Marine
Product Families
Composite Materials — Surface Finishes
- Gelcoats & Topcoats
Other characteristics
- Brand
- POLYCOR
- Color
- Custom, Off White, White
- Custom
- Off White
- White
- Functions
- Surface Finish
- Markets
- Automotive & Transportation
- Technology
- Composite Materials
- Application Methods
- Spray
- Shelf Life Storage
4 Months .. When the product is sealed in its original packing, stored indoors away from direct sunlight and direct heat sources and ideally at ambient temperature between 15°C and 25°C .
- Composite Materials Functions
- Surface Finish
Technical data
Table 1 of 3
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| H.D.T (NFT ISO 75)......... | 49 | °C | — |
| Tensile strength | 40 | MPa | — |
| Elongation at break | 9,9 | % | ISO 527 |
Table 2 of 3
7 rows| Characteristic | Value | Unit |
|---|---|---|
| Density | 1,25 - 1,35 | — |
| Thixotropic Index (5/50 rpm) | 3,8 - 5,0 | — |
| Sag Resistance | 500 | μm - wet |
| Hide depends colour | 500 - 700 | μm - wet |
| Color | Depends colour | — |
| Viscosity (25°C - Spindle 5-5 rpm) | 210 - 250 | dPa.s |
| Solid Content (15mn at 150°C) | 6,0 - 7,5 | % |
Table 3 of 3
4 rows| Characteristic | Value | Unit |
|---|---|---|
| Gel Time (200g - 25°C - 1,8% MEKP) | 18 - 22 | mn |
| Peak Time (200g - 25°C - 1,8% MEKP) | 40 - 70 | mn |
| Peak exotherm (°C) (200g - 25°C - 1,8% MEKP) | 110 - 160 | — |
| Film cure (500μ - 20°C - 2% MEKP) | 50 - 75 | mn |
