To catalogue
NORSODYNE® I 99282 TFA
NORSODYNE® I 99282 TFA - Unsaturated polyester resin in styrene,Orthophthalic. It is used as general purpose in injection molding,rtm,vacuum infusion method.
Product families
Applications
Building & Construction — Building Envelope & Roofing
- Glazing & Window Elements
- Shingles & Tiles
Building & Construction — Building Materials
- Fence Decks & Rails
- Interior Fixtures
- Pipes & Plumbing
- Siding & Trim
- Structural Components
- Wall Panels
Industrial — Chemical & Industrial Manufacturing
- Equipment & Parts
Building & Construction — Infrastructure, Roads & Paving
- Pavement Highways Roads & Bridges
Industrial — Oil, Gas & Mining
- Refining & Gas Processing
Industrial — Power, Water & Utilities
- Power & Utilities
- Renewable Energy
Product Families
Composite Materials — Polymers & Resins
- Thermoset Resins
Other characteristics
- Brand
- NORSODYNE
- End Uses
- Pipes, Structural Components, Tanks
- Polymer Name
- Polyester (unspecified)
- Processing Methods
Resin Transfer Molding (RTM), Vacuum Infusion Processing (VIP)
- Markets
- Building & Construction
- Industrial
- Shelf LIfe
- 4 Months (23°C in Dark )
- Technology
- Composite Materials
- Product Safety
Stir the resin before use, without use air bubbles
- Composites End Use
- Pipes
- Structural Components
- Tanks
- Material Features
- Low Shrinkage
- HIGHLIGHTS
- Low shrinkage
- Low viscosity
- Medium reactivity
- Preaccelerated
- Reduced fiber print-through
- Thixotropic
- Filled
- Handling
Store in the shade, out of direct sunlight; Keep storage temperature below 25°C; Unseal container just before use; Shelf life will be reduced reaching higher temperature
- Composite Materials Functions
- Resins Binders & Matrix Materials
- Composites Processing Methods
- Resin Transfer Molding (RTM)
- Vacuum Infusion Processing (VIP)
Technical data
Table 1 of 2
6 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Specific weight at 20°C | 1,30 | g/cm3 | — |
| Brookfield Viscosity at 23°C, sp 3 rpm 50 | 500 - 600 | mPa.s | MT-CUT23V |
| Solid Content | 60 - 65 | % | MT-CU001C |
| Gel Time at 23°C + 1,5% MEKP50 | 16 - 22 | minutes | MT-CU151R |
| Peak at 23°C + 1,5% MEKP50 | 25 - 30 | minutes | MT-CU151R |
| Exothermic peak at 23°C + 1,5% MEKP50 | 130 - 160 | °C | MT-CU151R |
Table 2 of 2
1 row| Characteristic | Value | Unit | Method |
|---|---|---|---|
| HDT | 145 | °C | ISO 75 -2A (2013) |
