Efalon® Virgin T-100

Chemical Family: Fluoropolymers

Efalon® Virgin T-100 has molecular structure composed of carbon and fluor atoms, EFALON® (PTFE) has a long list of unique properties uncommon in other materials. Polikim can make the following changes in material properties to meet the application requirements:.

Properties

Physical Form: Rods, Sheets, Tube
Rods
Sheets
Tube

Product families

Applications

Automotive & Transportation — Other Automotive & Transportation Applications; Electrical & Electronics — Other Electrical & Electronics Applications; Food & Nutrition — Other Food & Nutrition Applications

Building & Construction — Building Materials

Pipes & Plumbing

Industrial — Chemical & Industrial Manufacturing

Equipment & Parts
Other Industrial Applications

Electrical & Electronics — Devices & Assemblies

Other Devices & Assemblies

Healthcare & Pharma — Medical

Other Medical Applications

Other characteristics

Brand: Efalon
Density: 2100.0 - 2200.0 kg/m³
Features: Chemical Resistant, Electrically Insulating, Good Weather Stability, Non Stick, Wide Temperature Operating Range
Polymer Name: Polytetrafluoroethylene (PTFE)
Markets: Automotive & Transportation
Building & Construction
Electrical & Electronics
Food & Nutrition
Healthcare & Pharma
Industrial
Key Benefits: The least coefficient of friction among all solids; Resistant to almost all chemicals used in manufacturin; Very low coefficient of frictio; Wide range of continuous operating temperature between (-260°C, +270°C); Non-stick, inflammable; High electrical insulation; Perfect weatherability; FDA approved; Almost infinite shelf life
Technology: Plastics
Product Families: Plastics — Parts, Shapes & Films
Material Features: Chemical Resistant
Electrically Insulating
Good Weather Stability
Non Stick
Wide Temperature Operating Range
Certifications and Compliance: FDA Compliant
Plastics and Elastomers End Uses: Electrical/Electronic Applications
Gaskets
Machine/Mechanical Parts
Pump Parts
Valve Seats

Technical data

Table 1 of 5

8 rows

Characteristic	Value	Unit	Method
Density (23°C)	2.1 - 2.2	g/cm³	D792
Tensile Strength at Break	140 - 380	Kg/cm²	D638
Compressive Stress (%1 Deformation, 23°C)	45 - 50	Kg/cm²	D695
Total Deformation	14 - 16.8	%	D621
Permanent Deformation	7.5 - 8.5	%	D621
Elongation at Break (23°C)	200 - 400	%	D638
Hardness	54 - 60	Shore D	D2240
Impact Resistance (Izod, Notched)	15.5 - 16.5	Kj/m²	D256

Table 2 of 5

3 rows

Characteristic	Value	Unit
Coefficient of Friction (Static)	0.04	—
Coefficient of Friction (Dynamic)	0.06	—
PV Limits (3 m/min)	23 - 25	kg.cm³.min

Table 3 of 5

9 rows

Characteristic	Value	Unit	Method
Coefficient of Linear Thermal Expansion (25°C-100°C, [x10^-5])	12.5 - 16	°C-1	D696
Coefficient of Linear Thermal Expansion (25°C-100°C, [x10^-5])	15 - 19	°C-1	D696
Coefficient of Linear Thermal Expansion (25°C-100°C, [x10^-5])	21.5 - 25	°C-1	D696
Heat Conductivity (30°C, [x10^-4])	5.5 - 6	Cal/cm.sn.°C	—
Maximum Allowable Service Temperature in Air - Continuous	270	°C	—
Maximum Allowable Service Temperature in Air - Continuous	-260	°C	—
PV Limits (30 m/min)	37 - 40	kg.cm³.min	—
PV Limits (300 m/min)	52 - 56	kg.cm³.min	—
Specific Heat	0.23 - 0.25	Kcal/kg.°C	—

Table 4 of 5

1 row

Characteristic	Value	Unit	Method
Density (23°C)	2.1 - 2.2	g/cm³	D792

Table 5 of 5

6 rows

Characteristic	Value	Unit	Method
Surface Resistivity (23°C, RH 50%)	min. 10^16	Ohm	D257
Dielectric Loss Factor Dry (50 Hz, 23°C)	5.0e-05	—	D150
Electric Strength Shortterm (0.1 mm)	40 - 80	Kv/mm	D149
Relative Permittivitiy (50Hz-107Hz)	2 - 2.1	—	D150
Surface Resistivity (23°C, 50% RH)	min. 10^16	Ohm	D257
Volume Resistivity (23°C)	min. 10^18	Ohm-cm	D257