Silopren™ LSR 3286/50
- Chemical Family
- Silicones
Silopren™ LSR 3286/50 is a a two-component liquid silicone rubber for injection molding processes. This material is an excellent candidate to consider for the manufacture of elastomeric articles requiring self-lubricating properties. The self-lubricating effect is achieved by a fluid which exudes out of the vulcanizate over an extended period of time. It typically starts between a few hours and one day after vulcanization. Silopren™ LSR 3286/50 liquid silicone rubber shows a low compression set after vulcanization without post-curing.Key Features and BenefitsVulcanizates consisting of Silopren™ LSR 3286/50 liquid silicone rubber are typically distinguished by the following properties: low compression set without post-cure self-lubricating properties low viscosity fast cure high thermal stability outstanding resistance to aging easy to color Potential ApplicationsBecause of the outstanding properties, Silopren™ LSR 3286/50 liquid silicone rubber is an excellent candidate to consider for use in wire harness applications for the following elastomeric articles: cable seals grommets gaskets plug seals.
Properties
- Physical Form
- Liquid
Product families
Applications
- Consumer Goods — Other Consumer Goods Applications
- Other Parts & Components
- Other Wire & Cable Applications
Product Families
- Silicone Elastomers
Other characteristics
- Brand
- Silopren
- End Uses
- Grommets
- Features
Fast Curing, Fast Molding Cycle, Good Colorability, Good Mold Release, Good Thermal Stability, Low Compression Set, Low Viscosity, Self Lubricating
- Polymer Name
- Liquid Silicone Rubber (LSR)
- Tear Strength
- 45.0 - 45.0 kN/m
- Processing Methods
- Injection Molding
- Markets
- Consumer Goods
- Electrical & Electronics
- Appearance
- Translucent
- Flame Rating
- IEC 60695-11-10 HB
- Technology
- Elastomers
- Material Features
- Fast Curing
- Fast Molding Cycle
- Good Colorability
- Good Mold Release
- Good Thermal Stability
- Low Compression Set
- Low Viscosity
- Self Lubricating
- Country Availability
- Brazil
- Canada
- China (Mainland)
- Mexico
- USA
- Plastics and Elastomers End Uses
- Grommets
- Plastics and Elastomers Processing Methods
- Injection Molding
Technical data
Table 1 of 3
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Hardness | 50 | Shore A | ASTM D 2240 |
| Strain at break | 560 | % | ISO 37 |
| Tear Strength | 45 | kN/m | ISO 34-1 |
Table 2 of 3
1 row| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Density | 1120 | kg/m3 | ISO 1183 |
Table 3 of 3
2 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Burning Behavior at 1.5 mm nominal thickness | HB | class | IEC 60695-11-10 |
| Yellow Card available | yes | — | — |
