Metalon Downhole Tool Oil
Metalon Downhole Tool Oil provides the ultimate solution to the many obstacles confronting Downhole Tool Operations. Often times these depths exceed more than 5000 feet. The drilling tools, which vary in “diameter”, are subjected to tremendous pressure and friction causing very high temperatures. These very same factors adversely affect the bearings and races in the TOOL assembly. When this occurs, much time and increased costs are incurred. Metalon products delivers the practical solution.
Identification
Product families
Applications
- Exploration & Upstream
- Other Oil Gas & Mining Applications
Product Families
- Metalworking Fluids
Other characteristics
- Brand
- Metalon Products
- Features
- Friction Reduction, Wear Resistant
- Application Area
- Bearings, Drilling Applications
- Bearings
- Drilling Applications
- Metalworking Fluid Type
- Synthetic
- Markets
- Industrial
- PACKAGING
- 208L Drum.
- 20L Pail.
- Product Type
- Fluid
- Lubricant
- Technology
- Ready-to-Use Products
- Base Oil
- Synthetic Oil
- Packaging Type
- Drums
- HIGHLIGHTS
METALON/SYN DOWNHOLE TOOL OIL, is a formulation composed of the propriety METALON M and a high quality Synthetic Oil. This unique blend provides many benefits. The METALON in METALON M creates a monomolecular, friction and heat reducing, wear-resistant shield that instantly bonds chemically with all ferrous and nonferrous metal surfaces, that will not drain off. This applies to all the metal components including the bearings and the races increasing their efficiency. The inherent quality of heat reduction of METALON, helps to preserve the integrity of the quality Synthetic Oil in this unique, cost-effective blend.
- Ready to Use Product Features
- Friction Reduction
- Wear Resistant
Technical data
Table 1 of 1
10 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Specific Gravity | 28.74 | — | D-1298 |
| Flash Point (Closed Cup) | 245.0 | °C | D-92 |
| Pour Point | -31.0 | °C | D-97 |
| Viscosity SUS (40 °C) | 414.0 | cSt | D-445 |
| Viscosity SUS (100 °C) | 39.0 | cSt | D-445 |
| Viscosity Index | 137.0 | — | D-2270 |
| Rust Test (Synthetic Sea Water ) | 1a – Pass | — | D665 |
| Corrosion Test (Copper Strip) | No Corrosion | — | D-130 |
| TIMKIN Ok Load | min. 60 | lbs | D-2782 |
| Falex Final Torque (4500 lb. Jaw Load) | max. 60 | in.lbs. | D2271 |
