DEL-VAL 120 FIBERED EMULSION COATING
DEL-VAL 120 FIBERED EMULSION COATING is a fiber reinforced asphalt based clay emulsion coating designed for both brush and spray applications on a variety of roof substrates. This product has excellent resistance to water and cures to a tough durable finish.
Properties
- Physical Form
- Emulsion
- Liquid
Product families
Applications
- Other Building Envelope & Roofing Applications
Product Families
- Other Paints & Coatings
Other characteristics
- Brand
- DEL-VAL
- Features
Durable, Good Surface Finish, Good Toughness, Odorless, Water Resistant
- Product Type
- Coating
- Application Method
- Brush, Spray
- Compatible Substrates & Surfaces
- Concrete, Elastomers & Rubbers, Metal
- Usage
Del-Val 120 Fibered Emulsion Coating may be used on smooth surfaces BUR, SBS, APP bituminous membranes, metal surfaces, foundation walls and roll-roofing.. It can also be used for dampproofing above and below-grade foundation walls and masonry surfaces.
- Cleanup
- Clean tools with warm water and soap.
- Markets
- Building & Construction
- Coverage
Apply at the rate of approximately 3 gallons per 100 sq.ft. Must stir coating before using.
- PACKAGING
- Available in sizes 5gal, 55gal and 275gal.
- Technology
- Ready-to-Use Products
- Application Methods
- Brush
- Spray
- Application
Apply to a clean surface using a brush or squeegee. For best results weather should be clear with no threat of rain for 48 hours.
- Surface Preparation
All surfaces must be clean and free of any oil, grease, dirt and all other foreign matter. Repair all holes, cracks, blisters, tears or breaks by spreading Del-Val Flashing Cement over damaged area then embed United Asphalt Cotton or Fiberglass Fabric.
- Regulatory Compliance
This product meets or exceeds the requirements of ASTM D 1227-87 Type IV.
- Ready to Use Product Features
- Durable
- Good Surface Finish
- Good Toughness
- Odorless
- Water Resistant
- Compatible Substrates and Surfaces
- Concrete
- Elastomers & Rubbers
- Metal
