Xenopren® E/P-TD-21-V0

Chemical Family: Ethylene-Propylene Copolymers (EPR)Polyolefins

Xenopren® E/P-TD-21-V0 is a non-flammable propylene-ethylen copolymer modified with talc. This plastic thanks to using copolymer has a good impact strength, even at low temperatures. Significantly decreased flammability of this Xenopren® allow for using it in all cases where, because of risk of fire and high temperature, extremely low flammability is required. Processing of Xenopren® E/P-TD-21-V0 requires injection molding machines with pressure of injection 80MPa. Recommended cylinder temperature should be about 230-2500C and mold temperature 500C.

Product families

Applications

Agriculture & Feed — Agricultural Films

Pipes & Hoses

Automotive & Transportation — Automotive

Other Automotive Applications

Building & Construction — Building Envelope & Roofing

Other Building Envelope & Roofing Applications

Electrical & Electronics — Wire & Cable

Jacketing & Insulation

Product Families

Elastomers — Thermoset Elastomers

EP Rubbers (EPDM)

Other characteristics

Brand: Xenopren
Polymer Name: Ethylene Propylene Copolymer
Processing Methods: Injection Molding
Markets: Agriculture & Feed
Automotive & Transportation
Building & Construction
Electrical & Electronics
Flame Rating: UL 94 V0
Technology: Elastomers
Fillers Included: Talc
Material Features: Good Impact Strength
Non-Flammable
Certifications and Compliance: UL 94
Plastics and Elastomers Processing Methods: Injection Molding

Technical data

Table 1 of 1

7 rows

Characteristic	Value	Unit	Method
Tensile stress at yield	16	MPa	PN-81/C-89034 ISO 527
Elongation at yield	4	%	PN-81/C-89034 ISO 527
Elongation at break	5	%	PN-81/C-89034 ISO 527
Izod notched impact strenght (230 °C)	2.5	kJ/m2	PN-85/C-89050 ISO 180
Melt flow rate	7 - 11	g/10min	PN-93/C-89069 ISO 1133
Determination of ash	19 - 23	%	PN-93/C-89439 IS0 3451
Flammability	V0	—	UL 94