OpaLene LL T3804
- Chemical Family
- PolyethylenesPolyolefins
OpaLene LL T3804 is a butene co-monomer based medium density grade produced with the latest Ineos Gas Phase polymerization technology.
Properties
- Physical Form
- Granules
- Solid
Product families
Applications
- Agriculture & Feed — Other Agriculture & Feed Applications; Industrial — Other Industrial Applications; Consumer Goods — Sports & Recreation
- Equipment & Parts
- Other Packaging Materials
Product Families
- Polyolefins
Other characteristics
- Brand
- OpaLene
- Polymer Name
- Linear Low Density Polyethylene (LLDPE)
- Melt Flow Index
- 4.0 - 4.0 g/10 min
- Processing Methods
- Rotational Molding
- Markets
- Agriculture & Feed
- Consumer Goods
- Industrial
- Printing & Packaging
- Features
- Excellent Processability
- High Stiffness & Impact Strength
- Excellent Internal & External Surface finish
- Technology
- Plastics
- Material Features
- Good Impact Strength
- Good Processability
- Good Surface Finish
- High Stiffness
- Odorless
- Handling
Prevent Polyethylene Material from direct exposure to sunlight & heat to avoid quality deterioration. The storage location should be dry, dust free and the Storage temperature should not exceed 50 °C. Non - compliance to these precautionary measures can lead to degradation of the product causing Color changes, Odor & inadequate product performance.
- Regulatory Requirements
LLDPE grade T3804 shall meet the requirements stipulated in IS 10146:1982 on 'Specification of Polyethylene for safe use in contact with Foodstuff, Pharmaceutical & Drinking water'. The grade and Additives incorporated in this grade shall meet the positive list of constituents as prescribed in IS 10141:1982. The Grade and the additives incorporated in it shall als°Comply with the FDA: CFR Title 21,177.1520, Olefin Polymers.
- Recommended Applications
- Overhead water tanks
- Loft tanks
- Storage bins
- Toys and traffic barriers
- Sanitation & Agriculture products
- Certifications and Compliance
- FDA 21 CFR 177.1520
- IS 10141
- IS 10146
- RoHS Compliant
- Health and Safety Information
The product described herein may require precautions in handling and use because of toxicity, flammability, or other consideration. The Material Safety Data Sheet (MSDS) contains the available product health and safety information for this material and can be found at www.opalindia.in. Before using any material, a customer is advised t°Consult the MSDS for the product under consideration for use.
- Plastics and Elastomers End Uses
- Rigid Films
- Rigid Packaging
- Tanks
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Rotational Molding
Technical data
Table 1 of 1
8 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Melt Flow Index ( 190°C & 2.16 kg) | 4 | g/10 min | ASTM D1238 |
| Density (23°C) | 0.938 | g/cm³ | ASTM D1505 |
| Tensile Strength at Yield (50mm / min) | 18 | MPa | ASTM D638 |
| Elongation at Break (50mm / min) | min. 500 | % | ASTM D638 |
| Flexural Modulus | 650 | MPa | ASTM D790A |
| Notched Izod Impact Strength (at 23°C) | 300 | J/m | ASTM D256A |
| ESCR (F50, 10% Igepal Soln. v/v) | 200 | Hours | ASTM D1693B |
| Vicat Softening Point (10N) | 117 | °C | ASTM D1525 |
