Ad-Spray 101 (HAE)
Ad-Spray 101 (HAE) is a nonionic wetter and spreader designed to quickly wet and spread a more uniform spray deposit over plant surfaces, positively affecting pesticide spray application and pesticide efficacy. Ad-Spray can be used through irrigation systems for improved filtration of water into the soil.
Properties
- Physical Form
- Liquid
Product families
Applications
- Other Agricultural Crops
Product Families
- Stickers Surfactants & Wetting Agents
Other characteristics
- Brand
- Ad-Spray
- Functions
- Surfactant, Surfactant (Nonionic), Wetting Agent
- Markets
- Agriculture & Feed
- Technology
- Agrochemicals
- Packaging Type
- Cases
- Formulation Type
- Concentrate Solutions
- Use Direction
The addition of an adjuvant to some pesticides or pesticide tank mix combinations may cause phytotoxity to the foliage and/or fruit of susceptible crops. Prior to the addition of AD-SPRAY™ 101 to spray tank mixes, the user or application advisor must have experience with the combination or must have conducted a phytotoxicity trial.; AD-SPRAY™ 101 can be applied with ground, aerial or CDA spray equipment. For most applications, use enough AD-SPRAY™ 101 to allow for uniform wetting and deposition of the spray onto leaf and stem surfaces without undue runoff.; Ground: Herbicides ½-4 pints per 100 gallons. Insecticides, Acaracides, Fungicides 1-2 pints per 100 gallons.; Aerial: ½-2 pints per 100 gallons. For use with flood or overhead irrigation water: For flood irrigation, make a solution of 1 pint per 100 gallons of spray and apply the solution over the soil surface, spraying wet. For overhead irrigation, add; AD-SPRAY™ 101 directly into the irrigation water from a calibrated injection system. Use 1 pint per 100 gallons of water.; NOTE: The above use recommendations are considered to be adequate for most uses. Some pesticides, however, may require higher or lower rates for optimum effect. Follow the pesticide(s) label(s) directions when this occurs.
- HIGHLIGHTS
- Excellent cuticle penetration
- Improves coverage and canopy deposition
- Reduces evaporation and volatilization
- Helps tank mix compatibility
- General Information
AD-SPRAY™ 101 is a specially formulated non-ionic wetter/spreader surfactant. AD-SPRAY™ 101 is designed to improve the application efficiency of pesticide sprays by modifying contact, wetting and spreading of the sprays and can be used with a broad range of equipment. Optimum application effects, however, can be influenced by the crop, pest, spray equipment, spray volume, pressure, droplet size, spray mixture and environmental factors. Consequently, it is recommended that careful observation of the spray deposit be made and adjuvant concentrations be adjusted accordingly.
- Storage and Disposal
Do not contaminate water, food or feed by storage or disposal.; Store in original container only. Keep container tightly closed, do not allow water to be introduced into the contents of this container. Do not store near heat or open flame. Do not store with oxidizing agents.; PESTICIDE DISPOSAL: Wastes resulting from the use of this product may be disposed of on site or at an approved waste disposal facility.; CONTAINER DISPOSAL: Triple rinse (or equivalent). Then offer for recycling or reconditioning, or puncture and dispose of in a sanitary landfill, or incineration, or, if allowed by state and local authorities, by burning. If burned, stay out of smoke. For help in chemical emergencies involving spill, leak, fire or exposure call toll free 1-800-424-9300.
- Application Technique
- Aerial Application
- Ground Soil Applied
- Sprayers
