Solid Vulkollan® 18/40

Chemical Family: Polyurethanes (PU)Thermoplastic Polyurethanes (TPU)

Solid Vulkollan® 18/40 fills the gap in the hardness range between rubber-elastic materials and hard plastics (e.g. polyamide) and can be adjusted between 65 Shore hardness A and 70 Shore hardness D. Due to its excellent property profile, Vulkollan® is used in all areas of industry where the highest demands are placed on the material. Articles of different geometries from a few grams to more than 100kg unit weight can be produced economically both in large series and in individual production.

Product families

Applications

Industrial — Other Industrial Applications

Industrial — Chemical & Industrial Manufacturing

Equipment & Parts

Product Families

Elastomers — Thermoplastic Elastomers

Thermoplastic Urethanes (TPU)

Other characteristics

Brand: Solid Vulkollan
End Uses: Cups, Gaskets, Profiles, Rods, Squeegee, Tubes
Polymer Name: Thermoplastic Polyurethane (unspecified)
Strain at Break: 800.0 - 800.0 %
Processing Methods: Casting
Markets: Industrial
Technology: Elastomers
Material Features: Excellent Rebound
Excellent mineral Oil Resistance
Good Balance of Properties
Good Grease Resistance
Good Mechanical Properties
High Performance
Low Compression Set
Solvent Resistant
Plastics and Elastomers End Uses: Cups
Gaskets
Profiles
Rods
Squeegee
Tubes
Plastics and Elastomers Processing Methods: Casting

Technical data

Table 1 of 1

10 rows

Characteristic	Value	Unit	Method
Hardness	68	Shore A/D	ISO 868
Stress at 100% Strain	2.5	MPa	ISO 37
Stress at 300% Strain	4	MPa	ISO 37
Tensile Strength	35	MPa	ISO 37
Elongation at Break	800	%	ISO 37
Tear Propagation Resistance	20	KN/m	ISO 34
Rebound Resilience	45	%	ISO 4662
Abrasion Resistance	40	mm³	ISO 4649
Compression Set (70H / 23°C)	10	%	ISO 815
Compression Set (24H / 70°C)	15	%	ISO 815