epamine pc11
- CASE Ingredients Features
- Chemical ResistanceYellowing Resistance
- Chemical Family
- Aliphatics
EPAMINE PC11 is a curing agent for epoxy systems, based on cycloaliphatic amine,with a very low color. It acts as cycloaliphatic hardner.
Identification
- CASE Ingredients Functions
- Hardener
Product families
Applications
- Floor Coatings
- Floor Coatings
Product Families
- Functional Additives
Other characteristics
- Brand
- epamine
- Features
- Chemical Resistance, Yellowing Resistance
- Functions
- Hardener
- Labeling Claims
- Amine-free
- Compatible Polymers & Resins
- Epoxies (EP)
- Usage
It is normally used in self leveling flooring, mortars and general coatings, for ambient temperature curing of liquid epoxy resins.
- Markets
- Building & Construction
- Paints & Coatings
- Appearance
- clear
- Technology
- CASE Ingredients
- Chemical Resistance
EPAMINE PC11 was mixed with the following epoxy resins:; EBL 70, bisphenol-A based epoxy resin, 100%; EBL 74, bisphenol-A based epoxy resin modified with C12-C14 reactive diluent; EBL 96, bisphenol-F based epoxy resin, 100%; The following table shows the % weight gain or loss, after 21 days of immersion in various chemical, at 25°C.
- Handling
EPAMINE curing agent may absorb moisture and CO2 if drums are not well closed.; EPAMINE curing agent should be stocked in dry place at a temperature between 5 and 35°C; in this condition, self life is at least 1 year, from the date of manufacture, if in the original sealed container.; Lower temperature could bring increase in viscosity (reversible) and haziness.; EPAMINE curing agents and epoxy resin must be mixed just before application; avoid contact with eyes and skin, do not inhale vapors, wear protective clothes, glasses and gloves. Use only with adequate ventilation.
- Mechanical resistance
EPAMINE PC11 was mixed with the following epoxy resins:; - EBL 70, bisphenol-A based epoxy resin, 100%
- Product Characteristic
- Very low color
- Good yellowing resistance
- High chemical resistances
- Low viscosity
- Good esthetical properties (no amine blush)
- EPAMINE PC11 is allowed for food contact.
- Certifications and Compliance
- FDA Compliant
- Compatible Polymers and Resins
- Epoxies (EP)
Technical data
Table 1 of 1
12 rows| Characteristic | Value | Unit |
|---|---|---|
| Active Content | 100 | % |
| Amine Value | 260 - 300 | mg KOH/g |
| Average Hydrogen Equivalent | 114 | — |
| Brookfield Viscosity (25°C) | 350 - 650 | mPa.s |
| Color Gardner | max. 2 | — |
| Full Curing Time (25°C) | 4 : 7 | Days |
| Gel time (150g, 25°C) | 50 | min |
| Peak Exotherm (100g, 25°C) | 90 | °C |
| PHR in Combination with Liquid Epoxy Resin (EEW= 190) | 60 | — |
| PHR in Combination with Liquid Epoxy Resin (EEW= 190) | 50 : 60 | — |
| Thin Film Set Time (25°C) | 7 | hr |
| Use level (pHR, EEW=190) | 60 | — |
