To catalogue
NUC DNDV-0405R
- Chemical Family
- PolyethylenesPolyolefins
NUC DNDV-0405R are used in many of packages, bottles and tubes for daily necessities such as seasonings, eye drops, internal medicine as well as cosmetics which are produced by hollow molding, extrusion molding or injection molding due to good processability.
Product families
Applications
Applications
- Consumer Goods — Housewares; Consumer Goods — Other Consumer Goods Applications; Electrical & Electronics — Other Electrical & Electronics Applications
Healthcare & Pharma — Medical
- Other Medical Applications
Product Families
Plastics — Basic Thermoplastics
- Polyolefins
Other characteristics
- Polymer Name
- Low Density Polyethylene (LDPE)
- Melt Flow Index
- 32.0 - 32.0 g/10 min
- Processing Methods
- Injection Molding
- Markets
- Consumer Goods
- Electrical & Electronics
- Healthcare & Pharma
- Technology
- Plastics
- Material Features
- Good Processability
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Injection Molding
Technical data
Table 1 of 1
10 rows| Characteristic | Value | Unit |
|---|---|---|
| Melt Flow Rate - MFR | 32 | g/10min |
| Density | 0.914 | g/cm3 |
| Melting Point | 105 | °C |
| Softening Point (Vicat) | 73 | °C |
| Brittleness (F50) | -35 | °C |
| Tensile Modulus | 90 | MPa |
| Tensile Stress at Yield | 7 | MPa |
| Tensile Stress at Break | 7.5 | MPa |
| Elongation at Break | 440 | % |
| Durometer Hardness | 45 | HDD |
