Robnor MP304H
- Chemical Family
- Polyurethanes (PU)
Robnor MP304H is a two-part rigid polyurethane foam used for space filling, Insulation and protection.
Product families
- Foam Cores
Other characteristics
- Brand
- Robnor
- Core Type
- Polyurethane Foam
- Functions
- Core Material
- Compatible Polymers & Resins
- Polyurethanes (PU)
- Resin
- RP304H
- Markets
- Automotive & Transportation
- Electrical & Electronics
- Hardener
- HP304H
- Core
- Polyurethane Foam
- PACKAGING
- MP304H is available in bulk containers and kits
- Application
- Cable blocking
- Insulation
- Anti-vibration
- Technology
- Composite Materials
- Key Property
- Closed cell
- Fast curing
- Non-shrinking
- Packaging Type
- Bulk
- Health and Safety
Resins, hardeners and solvents may cause sensitisation by skin contact or inhalation may be corrosive, harmful or toxic. It is therefore strongly recommended that skin and eye contact is avoided by the using of appropriate personal protective equipment; such as gloves, safety glasses or goggles and overalls.; Wash any contamination from the skin immediately and thoroughly and do not eat, smoke or drink in the working vicinity. Under spraying conditions where vapor levels are likely to exceed the occupational exposure limits appropriate respiratory protection must be worn.; suitable spray booth should be used with appropriate solvent scrubbing, cleaning and collection facilities. Local exhaust ventilation (LEV) will be required especially for curing ovens or where large volumes of material are curing. The above is given as a guide only; please refer to RP/HP304H Health and Safety data or our Technical Service Department for individual/specific advice.
- Composites End Use
- Marine Applications
- Material Features
- Electrically Insulating
- Excellent Filling Properties
- Fast Curing
- Flexible
- Good Shrinkage Resistance
- Vibration Damping
- Shelf Life Storage
Material stored in the original unopened containers under cool dry condition between 15° and 25°C will have a shelf life of at least one year. Once used the containers must be kept sealed to prevent effects from water, air or contaminants.
- Certifications and Compliance
- ISO 9001
- RoHS Compliant
Technical data
Table 1 of 1
18 rows| Characteristic | Value | Unit |
|---|---|---|
| Resin Specific Gravity | 1.04 | — |
| Resin Viscosity (25°C) | 800.0 | mPa.s |
| Hardener Specific Gravity | 1.24 | — |
| Hardener Viscosity (25°C) | 350.0 | mPa.s |
| Specific Gravity (Mixed) | 1.13 | — |
| Viscosity (Mixed, 25°C) | 500.0 | mPa.s |
| Thermal Conductivity | 0.03 | W/m. K |
| Co-efficient of Thermal Expansion | 60 - 80 | ppm/°C |
| Dielectric Constant (25°C) | 1.5 | 50hz |
| Operating Temperature range | -60 to +130 | °C |
| Compressive Strength | 0.1 | MPa |
| Tack Free Time | 10.0 | Minutes |
