Aluma45® MG-Rich Primer
- Chemical Family
- Magnesium & Magnesium Compounds
Elinor Aluma45® preserves the substrate via patented active sacrificial protection. This allows a long-lasting and stable defense from degradation and corrosion and exceptional adhesion for all aluminum alloys by using magnesium pigment in an epoxy-modified polyamide. This primer completely eliminates chromium from your coating system and helps you meet health and environmental compliance in your operations easily and affordably.
Product families
Applications
- Aerospace Coatings
- Marine Coatings
- Aerospace & Aviation
- Marine
Product Families
- Primers & Sealers
Other characteristics
- Brand
- Aluma45
- Features
Corrosion Resistant, Cost Effective, Durable, Flexible, Good Adhesion, High Efficiency
- Product Type
- Primer
- Compatible Substrates & Surfaces
- Aluminum, Metal
- Color
- Grey
- Markets
- Automotive & Transportation
- Cure
- Chemical Cure
- Technology
- Ready-to-Use Products
- Labeling Claims
- Chromate-free
- Recommended Uses
Prepared aluminum surfaces in demanding industrial and chloride-rich environments:; Naval and maritime vessels; Superstructures and antennae; Construction equipment; Ground vehicles; Support equipment; Multi-metal rivets and joints
- Attributes
Eliminate chromium pre-washes and chromium-based primers.; Eliminate costly and dangerous hazmat spraying and disposal.; Eliminate the need to prime and paint at the same time.; Magnesium-based primers protect aluminum from filaform corrosion, poor adhesion, and premature paint system failure.; One single spray coat cold anodizes the surface, creates superior adhesion, and protects against filaform corrosion.; The surface remains flexible and durable allowing your pre-primed aluminum to be stored for up to one year without worry of oxidation on the surface. Oven-cure for faster turnaround time.; Revolutionize your painting process while increasing efficiency and dramatically lowering the cost. Your spray booth will be free from carcinogens and your surface prep time will be cut in half.
- Recommended Systems
- Aluminum
- 2000, 5000, 6000, 7000 Series, Cr-free pretreatment, any Cr-free topcoat
- Multimetal
- Primarily aluminum + any metal fastened together
- Structures & Components
- Cr-free pretreatment, High performance topcoat (e.g. non-chromate fluoro polyurethane)
- Ready to Use Product Features
- Corrosion Resistant
- Cost Effective
- Durable
- Flexible
- Good Adhesion
- High Efficiency
- Compatible Substrates and Surfaces
- Aluminum
- Metal
Technical data
Table 1 of 1
5 rows| Characteristic | Value | Unit |
|---|---|---|
| Volume Solids | 53.0 | % |
| Finish (Low Gloss GU) | max. 10 | — |
| Weight Solids | 62.0 | % |
| VOC (EPA Method 24) | max 2.82 | Ib/gallon |
| Mix Ratio | 4:1:1 | — |
