To catalogue
INNOPRENE 1450
INNOPRENE 1450 is a product that is already completely cross-linked and there is no need for an extra cross-link process before its ultimate use. Also, it is possible to simplify the processes and reduce the prime cost as it is an environment-friendly material allowing for an easy recycle of scraps resulted from processing.
Properties
- Physical Form
- Pellets
- Solid
Product families
Elastomers — Thermoplastic Elastomers
- Thermoplastic Vulcanizates (TPV)
Other characteristics
- Brand
- INNOPRENE
- Polymer Name
- Thermoplastic Vulcanizate (TPV)
- Processing Methods
Blow Molding, Calendering, Extrusion, Injection Molding
- Markets
- Agriculture & Feed
- Automotive & Transportation
- Building & Construction
- Consumer Goods
- Electrical & Electronics
- Industrial
- Recycle
INNOPRENE is a thermoplastic rubber of which the waste materials generated during the production process can be recycled.; Recycled waste does not degrade the physical properties significantly.; Waste material recycling ratio should be 20% or less to minimize problems during the production process.
- Features
- Low Specific Gravity
- Excellent Chemical Resistance & Heat Resistance
- Excellent Electrical Insulation
- Low Permanent Set & Compression Set
- Excellent Flex Fatigue Resistance
- Excellent Tear Strength
- Excellent Ozone-Resistance & Weather Resistance
- Recycling
- Technology
- Elastomers
- Labeling Claims
- Environmentally Friendly
- Recyclable
Technical data
Table 1 of 2
6 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Hardness | 46A | Shore | IS0868 |
| Hardness | 46 | Shore A | IS0868 |
| Tensile Strength | 50 (50) | kg/an | D 412 (IS037) |
| Elongation | 650 (650) | % | D412 (15037) |
| Heat aging Tensile Strength | -6(-6) | Shore Change in Property | D 412 (150188) |
| Heat aging Elongation | -10 (-10) | Shore Change in Property | D 412 (150188) |
Table 2 of 2
8 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Specific Gravity | 0.95 (0.95) | — | D 297 (IS01183) |
| UV Resistance | max. 1.0 | E* | SAE J1960 |
| 100% Modulus | 15 (15) | kg/om | D 412 (15037) |
| Tear Strength | 25 (25) | kg/cm | D 624 (ISO34-1) |
| Low Temperature Brittleness | -63 | °C | IS0812, Type B |
| C-set | 40 (40) | % | D395-03 (150815 Type A) |
| Fluid resistance 50% NaOH | 1 | % | D 471 |
| Fluid resistance 10% HCL | 3 | % | D 471 |
