SHD Composites PS200
Shanghai Sunwise Chemical PS200 prepreg is a flame retardant resin system with high service temperature designed for heat and flame shielding. It can be supplied on a variety of fabrics to meet your cost and manufacturing requirements. This resin system color is dark brown / black.
Product families
Applications
- Consumer Goods — Sports & Recreation
- Chassis & Brake
- Exterior & Body
- Interior
- Other Automotive Applications
- Powertrain & UTH
Product Families
- Other Prepregs & Molding Compounds
Other characteristics
- Functions
- Prepreg
- Processing Methods
- Prepreg Processing
- Markets
- Automotive & Transportation
- Consumer Goods
- Key Features
- Cure temperature from 120°C
- Service temperature up to 300°C after post cure*
- Work life at 20°C: 21 days
- Storage life at -18°C: 12 months
- Rated UL94 V0
- *Capable of exposure to higher temperatures
- Technology
- Composite Materials
- Packaging Type
- Bags
- Health and Safety
The following precautions must be taken when using PFA resin prepregs:; Impervious gloves are recommended.; To avoid exotherm, particular care must be taken with thick laminates.; Ramp rates must not exceed 3.0°C/min during initial cure and 1.0°C/min during post cure.
- Material Features
- Flame Retardant
- Temperature Resistance
- Storage and Out Life
This material should be kept frozen at -18°C for a maximum storage life. If kept refrigerated at 6°C storage life will be reduced to 2 months. It must be kept sealed in a polythene bag which must not be opened until fully thawed to room temperature. If the material is not fully used, then the material must be resealed in the polythene bag to prevent moisture absorption.
- Typical Applications
- Automotive / Electric Vehicles – Flame retardant
- Recommended Cure Cycle
Recommended initial cure cycles:; Autoclave cure; 130°C for 1 hr, at a ramp rate of 2-3°C/min; P3 Release film recommended; Oven cure; 90°C for 30 mins, at a ramp rate of 2-3°C/min; Press cure; Cool down below 90°C before opening the press; The cures given are as a guide only and will be subject to changes in part geometry and construction.
- Composite Materials Functions
- Prepreg
- Composites Processing Methods
- Prepreg Processing
Technical data
Table 1 of 1
6 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Cure Temperature | 120 - 130 | °C | — |
| Cure Time | 1.5 - 1 | — | hrs,mins |
| Outlife | 21 | — | months |
| Tg Onset | 350 | — | — |
| Tg Peak | 390 | — | — |
| Service Temperature | 300 | °C | — |
