To catalogue
Polynt Group HUP 16/25 RN-Decor
Polynt Group HUP 16/25 RN-Decor is generally used in building and construction, cosmetics, foundries, peroxides applications.
Product families
Applications
Building & Construction — Building Envelope & Roofing
- Glazing & Window Elements
- Shingles & Tiles
Building & Construction — Building Materials
- Fence Decks & Rails
- Interior Fixtures
- Pipes & Plumbing
- Siding & Trim
- Structural Components
- Wall Panels
Industrial — Chemical & Industrial Manufacturing
- Tooling & Moldmaking
Building & Construction — Infrastructure, Roads & Paving
- Pavement Highways Roads & Bridges
Product Families
Composite Materials — Prepregs & Molding Compounds
- Sheet Molding Compounds (SMC)
Other characteristics
- Functions
- Molding Compound
- Markets
- Building & Construction
- Industrial
- Technology
- Composite Materials
- Handling
- Storage condition store dry at max
- 25 °C and out of direct sun light
- Molding time 30 sec
- /mm
- Molding pressure 80 - 100 bar
- Molding temperature 140 - 160 °C
- Composite Materials Functions
- Molding Compound
Technical data
Table 1 of 1
17 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Surface Resistance | 10^13 | Ohm | IEC 93 |
| dielectric loss factor at 1000 Hz IEC 250 | 0,02 | — | tan s |
| Shrinkage | 0,10 | % | ISO 2577 |
| Specific Density | 1,75 | g/cm3 | ISO 1183 A |
| surface weight ISO 10352 | 3.3 | g/m2 | — |
| fibre Content ISO 1172 | 25 | % | — |
| fibre length DF PA3.01 | 25/50 | mm | — |
| Curing Time ISO 12114/1 | 90 | sec | — |
| flexural modulus ISO 14125 | 140 | N/mm2 | — |
| flexural strength ISO 14125 | 9 | N/mm2 | — |
| impact strength ISO 179 | 50 | KJ/m2 | — |
| heat distortion temperature ISO 75-2° | 200 | °C | — |
