To catalogue
Polynt Group BMC GP 400/25
Polynt Group BMC GP 400/25 is a bulk molding compound based on an unsaturated polyester resin, reinforced with glass fibers. This BMC has been developed for general purpose. Excellent mechanical properties and good flow are combined into the BMC GP 400/25. BMC GP 400/25 is formulated according to RoHS, REAC regulation SVHC and WEEE European legislation.
Product families
Applications
Industrial — Chemical & Industrial Manufacturing
- Equipment & Parts
Industrial — Oil, Gas & Mining
- Refining & Gas Processing
Industrial — Power, Water & Utilities
- Power & Utilities
- Renewable Energy
Product Families
Composite Materials — Prepregs & Molding Compounds
- Bulk Molding Compounds (BMC)
Other characteristics
- End Uses
- Pipes, Tanks
- Functions
- Molding Compound
- Reinforcement Material
- Glass Fibers
- Markets
- Industrial
- Technology
- Composite Materials
- Composites End Use
- Pipes
- Tanks
- Handling
Storage in a dry place at 15-25°C, out of direct sunlight; Molding time 30 s/mm; Molding pressure 60 - 110 bar; Molding temperature 140 - 160°C
- Certifications and Compliance
- REACH (Europe)
- Composite Materials Functions
- Molding Compound
Technical data
Table 1 of 1
12 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Rockwell Hardness | 80 | Scale M | ISO 2039-2 |
| Flexural strength | 100 | MPa | ISO 14125A |
| Impact strength (Charpy) | 35 | KJ/m2 | ISO 179 |
| Heat distortion temperature HDT | min. 200 | °C | ISO 75 |
| Flexural modulus | 11 | MPa | ISO 14125A |
| Tracking resistance CTI | 600 | V | IEC 112 |
| Quantity of glass | 20 | % | — |
| Linear Shrinkage | 0,15 | % | ISO 2577 |
| Water absorption | 0,2 | % | ISO 62 Met. 1 |
| Density | 1,8 | g/cm3 | ISO 1183 |
| Surface resistivity | 10^14 | — | — |
| Volume resistivity | 10^14 | — | — |
