To catalogue
NORSODYNE® R 26391 T
NORSODYNE® R 26391 T - Unsaturated polyester resin in styrene,Ortophthalic-Neopentylic. It is used to produce relining,cipp,pipes and tanks.
Product families
Applications
Building & Construction — Building Envelope & Roofing
- Glazing & Window Elements
- Shingles & Tiles
Building & Construction — Building Materials
- Fence Decks & Rails
- Interior Fixtures
- Pipes & Plumbing
- Siding & Trim
- Structural Components
- Wall Panels
Industrial — Chemical & Industrial Manufacturing
- Equipment & Parts
Building & Construction — Infrastructure, Roads & Paving
- Pavement Highways Roads & Bridges
Industrial — Oil, Gas & Mining
- Refining & Gas Processing
Industrial — Power, Water & Utilities
- Power & Utilities
- Renewable Energy
Product Families
Composite Materials — Polymers & Resins
- Thermoset Resins
Other characteristics
- Brand
- NORSODYNE
- End Uses
- Pipes, Structural Components, Tanks
- Polymer Name
- Polyester (unspecified)
- Processing Methods
- Continuous Lamination
- Markets
- Building & Construction
- Industrial
- Shelf LIfe
- 6 Months (23°C in Dark )
- Technology
- Composite Materials
- Product Safety
Stir the resin before use, without use air bubbles
- Composites End Use
- Pipes
- Structural Components
- Tanks
- Material Features
- Chemical Resistant
- HIGHLIGHTS
- Thixotropic
- Very good chemical resistance
- Handling
Store in the shade, out of direct sunlight; Keep storage temperature below 25°C; Unseal container just before use; Shelf life will be reduced reaching higher temperature
- Composite Materials Functions
- Resins Binders & Matrix Materials
- Composites Processing Methods
- Continuous Lamination
Technical data
Table 1 of 2
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Solid Content | 50 - 54 | % | MT-CU001C |
| Gel Time at 60°C + peroxydes | 18 - 22 | minutes | MT-CU160R |
| Delta at 60°C + peroxydes | 20 - 28 | minutes | MT-CU160R |
| Exothermic peak at 60°C + peroxydes | 200 - 240 | °C | MT-CU160R |
Table 2 of 2
6 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Flexural strength at 40°C for 16h / + 2 h at 90°C | 115 | MPa | ISO 178 (2011) |
| Flexural modulus at 40°C for 16h / + 2 h at 90°C | 3800 | MPa | ISO 178 (2011) |
| Elongation at break at 40°C for 16h / + 2 h at 90°C | 3,5 | % | ISO 527 (2012) |
| Tensile strength at 40°C for 16h / + 2 h at 90°C | 65 | MPa | ISO 527 (2012) |
| Tensile Modulus at 40°C for 16h / + 2 h at 90°C | 3600 | MPa | ISO 527 (2012) |
| HDT at 40°C for 16h / + 2 h at 120°C | 100 | °C | ISO 75 -2A (2013) |
