To catalogue
SMCarbon® 90CF50-12K
- Chemical Family
- Epoxy & Epoxy Derivatives
SMCarbon® 90CF50-12K - Sheet molding compound based on epoxy resin and reinforced with carbon fibers designed for compression molding technology. This epoxy based SMC is suitable only for application with thickness of 15 mm at maximum.
Product families
Applications
Automotive & Transportation — Automotive
- Chassis & Brake
- Exterior & Body
- Interior
- Powertrain & UTH
Industrial — Chemical & Industrial Manufacturing
- Equipment & Parts
Industrial — Oil, Gas & Mining
- Refining & Gas Processing
Industrial — Power, Water & Utilities
- Power & Utilities
- Renewable Energy
Automotive & Transportation — Transportation
- Aerospace & Aviation
- Marine
- Rail & Mass Transit
Product Families
Composite Materials — Prepregs & Molding Compounds
- Sheet Molding Compounds (SMC)
Other characteristics
- Brand
- SMCarbon
- End Uses
- Pipes, Tanks
- Functions
- Molding Compound
- Markets
- Automotive & Transportation
- Industrial
- Technology
- Composite Materials
- Composites End Use
- Pipes
- Tanks
- Material Features
- Good Mechanical Properties
- Handling
Store the product in its original sealed packaging at 23°C. Leave product to reach room temperature before unrolling, to prevent condensation. The usual precautions when handling uncured synthetic resins and fine fibrous materials should be observed, and a Safety Data Sheet is available for this product. The use of clean disposable inert gloves provides protection for the operator and avoids contamination of material and components.
- Composite Materials Functions
- Molding Compound
Technical data
Table 1 of 1
7 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Density | 1.46 | g/cm3 | ISO 1183 A |
| Tensile strength | 195 | N/mm2 | ISO 527-4 |
| Shrinkage | -0.07 | % | ISO 2577 |
| Tensile Modulus | 29400 | N/mm2 | ISO 527-4 |
| Flexural modulus | 23750 | N/mm2 | ISO 14125 |
| Flexural strength | 322 | N/mm2 | ISO 14125 |
| impact strength | 52 | KJ/m2 | ISO 179 |
