To catalogue
Polynt Group HUP-LW 14/35 RN-1090
Polynt Group HUP-LW 14/35 RN-1090 is generally used in automotive, mass transports applications.
Product families
Applications
Automotive & Transportation — Automotive
- Chassis & Brake
- Exterior & Body
- Interior
- Powertrain & UTH
Automotive & Transportation — Transportation
- Aerospace & Aviation
- Marine
- Rail & Mass Transit
Product Families
Composite Materials — Prepregs & Molding Compounds
- Sheet Molding Compounds (SMC)
Other characteristics
- Functions
- Molding Compound
- Markets
- Automotive & Transportation
- Technology
- Composite Materials
- Handling
- Storage condition store dry at max
- 25 °C and out of direct sun light
- Molding time > 25 sec
- /mm
- Molding pressure 60-80 bar
- Molding temperature 140 - 150 °C
- Composite Materials Functions
- Molding Compound
Technical data
Table 1 of 1
14 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Shrinkage | - 0,05 | % | ISO 2577 |
| Specific Density | 1,58 | g/cm3 | ISO 1183 A |
| fibre length | 25 | mm | PA 3.01 |
| Curing Time | 90 | sec | ISO 12114/1 |
| Tensile strength | 80 | N/mm2 | ISO 527-4 |
| heat distortion temperature | min. 200 | °C | ISO 75-2 |
| impact strength | 80 | KJ/m2 | ISO 179 |
| fibre Content | 35 | % | ISO 1172 |
| Water absorption | max. 50 | mg | ISO 62 |
| surface weight | 3.3 | g/m2 | ISO 10352 |
| Flexural strength | 150 | N/mm2 | ISO 14125 |
| Flexural modulus | 7.5 | N/mm2 | ISO 14125 |
