To catalogue
Polynt Group BMC S 1800 Structural
Polynt Group BMC S 1800 Structural is a bulk molding compound based on a blend of different thermoset resins reinforced with glass fibers. This BMC has been developed for structural application. Excellent mechanical properties, mainly impact resistance, and easy molding behavior are combined into the BMC S 1800. BMC S 1800 is formulated according to RoHS, REAC regulation SVHC and WEEE European legislation.
Product families
Applications
Applications
- Consumer Goods — Appliances & Electronics
- Consumer Goods — Sports & Recreation
Automotive & Transportation — Automotive
- Chassis & Brake
- Exterior & Body
- Interior
- Powertrain & UTH
Building & Construction — Building Envelope & Roofing
- Glazing & Window Elements
- Shingles & Tiles
Building & Construction — Building Materials
- Fence Decks & Rails
- Interior Fixtures
- Pipes & Plumbing
- Siding & Trim
- Structural Components
- Wall Panels
Industrial — Chemical & Industrial Manufacturing
- Equipment & Parts
- Tooling & Moldmaking
Building & Construction — Infrastructure, Roads & Paving
- Pavement Highways Roads & Bridges
Healthcare & Pharma — Medical
- Dental
- Implants & Prosthetics
- Medical Devices & Assemblies
Industrial — Oil, Gas & Mining
- Refining & Gas Processing
Electrical & Electronics — Parts & Components
- Housings & Enclosures
- Printed Circuit Boards (PCBs)
Industrial — Power, Water & Utilities
- Power & Utilities
- Renewable Energy
Automotive & Transportation — Transportation
- Aerospace & Aviation
- Marine
- Rail & Mass Transit
Product Families
Composite Materials — Prepregs & Molding Compounds
- Bulk Molding Compounds (BMC)
Other characteristics
- End Uses
- Pipes, Tanks
- Functions
- Molding Compound
- Reinforcement Material
- Glass Fibers
- Markets
- Automotive & Transportation
- Building & Construction
- Consumer Goods
- Electrical & Electronics
- Healthcare & Pharma
- Industrial
- Technology
- Composite Materials
- Composites End Use
- Pipes
- Tanks
- Handling
Storage at 15-25°C, in dry ambient and out of direct sun light; Molding time 30 s/mm; Molding pressure 60 - 110 bar; Molding temperature 140 - 160°C
- Certifications and Compliance
- REACH (Europe)
- Composite Materials Functions
- Molding Compound
Technical data
Table 1 of 1
11 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Heat distortion temperature HDT | min. 200 | °C | ISO 75 |
| Tracking resistance CTI | 600 | V | IEC 112 |
| Flexural modulus | 9 | MPa | ISO 14125A |
| Flexural strength | 120 | MPa | ISO 14125A |
| Linear Shrinkage | 0,05 | % | ISO 2577 |
| Impact strength (Charpy) | 60 | KJ/m2 | ISO 179 |
| Rockwell hardness | 80 | HRm | ISO 2039-2 |
| Density | 1,75 | g/cm3 | ISO 1183 |
| Water absorption | max. 0,2 | % | ISO 62 Met. 1 |
| Surface resistivity | 10^14 | — | — |
| Volume resistivity | 10^14 | — | — |
