POLSIL® GUM 213/60
- Chemical Family
- Silicones
Polsil® GUM 213/60 is a special grade heat cured elastomer designed for flame-retardant applications.
Properties
- Physical Form
- Fluid
- Liquid
Product families
Applications
- Pipes & Hoses
- EIFS & Insulation
- Other Building Materials
- Building Wires & Power Cables
- Jacketing & Insulation
- Other Wire & Cable Applications
Product Families
- Silicone Elastomers
Other characteristics
- Brand
- POLSIL
- End Uses
- Electrical Insulation, Gaskets, Hoses, Profiles
- Features
Chemical Resistant, Durable, Flame Retardant, Flexible, Good UV Resistance, Heat Resistance, High Gas Permeability, Non-Flammable, Ozone Resistant
- Polymer Name
- Silicone Elastomer
- Processing Methods
- Compression Molding, Extrusion
- Markets
- Agriculture & Feed
- Building & Construction
- Electrical & Electronics
- Packing
Packing; Polyethylene foil and cardboard boxes.; Warranty periods 6 months from the date of manufacture
- Storage
Storage; Store in the original tightly closed containers at dry conditions at temperature from 0 to 40°C.
- Appearance
- White-grey
- Cure
- Heat Cure
- Technology
- Elastomers
- Packaging Type
- Boxes
- Material Features
- Chemical Resistant
- Durable
- Flame Retardant
- Flexible
- Good UV Resistance
- Heat Resistance
- High Gas Permeability
- Non-Flammable
- Benefits and Features
Non-flammable; High Resistance to Aging Caused by Light, Oxygen, Environment Factors; Resistance to Uv Radiation and Ozone; Resistance to Low and High Temperatures at Low Change-Abilities of Physical Characteristic; Chemical Resistance; Very Good Insulation Properties; Gas Permeability; Flexibility and Durability; Physiologically Neutral
- Production of Masterbatches
HTV silicon rubbers are available as masterbatches or compounds ready for processing and containing such additives like peroxides, pigments etc. The names of compounds are determined on the used HTV masterbatch. Depending on added peroxide, so called vulcanization initiator – a letter D, T or M is added to the name of a rubber. The color of the compounds is determined by the RAL palette or by the common name transparent.
- Plastics and Elastomers End Uses
- Electrical Insulation
- Gaskets
- Hoses
- Profiles
- Plastics and Elastomers Processing Methods
- Compression Molding
- Extrusion
Technical data
Table 1 of 1
6 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Hardness | 66-70 | Shore A | PN – EN ISO 868 |
| Tensile Strength | min. 6.0 | MPa | PN - ISO 37 |
| Elongation at Break | min. 200 | % | PN - ISO 37 |
| Tear Resistance | min.15 | kN/m | PN - ISO 34-1 |
| Thermal Resistance | up to 250 | °C | — |
| Density | 1.22 - 1.28 | g/cm3 | PN - ISO 2781:1966 |
