To catalogue
SynFoam® FP-3
SynFoam FP-3 is a two part, closed cell foam in place polyurethane resin system. Upon mixing the A and B side, the system will expend to the final density and rapidly cure to form a rigid structure. When cured FP-3 will provide a rigid structure that is capable of high temperature use up to 135o C. FP-3 is suitable for the encapsulation of electronic modules, rockets, satellites, and antennas. In has been used as a direct replacement for the discontinued Eccostock FPH.
Product families
Applications
Electrical & Electronics — Parts & Components
- Housings & Enclosures
- Other Parts & Components
Product Families
Composite Materials — Core Materials
- Foam Cores
Other characteristics
- Brand
- SynFoam
- Core Type
- Syntactic Foam
- Functions
- Core Material
- Markets
- Electrical & Electronics
- Core
- Syntactic Foam
- Availability
SynFoam FP-3 is available as 1 quart, and 1 gallon kits.
- Technology
- Composite Materials
- Composites End Use
- Microwave Antennas
- Satellites
- Composite Materials Functions
- Core Material
Technical data
Table 1 of 1
9 rows| Characteristic | Value | Unit |
|---|---|---|
| Density | 2 - 4 | pcf |
| Compressive Strength | 30.0 | psi |
| Flex Strength | 25.0 | psi |
| Tensile Strength | 50.0 | psi |
| Operating Temperature, max | max. 280 | °F |
| Thermal Conductivity | 0.03 | W/m-oK |
| Dielectric Constant (1GHz) | 1.04 | — |
| Dissipation Factor (1GHz) | 0.0001 | — |
| Dielectric Strength | 40.0 | volts/mil |
