RECarbon® 90CFP40-400gr
RECarbon® 90CFP40-400gr - Recycled molding compound based on epoxy resin and reinforced with reinforced with pyrolized carbon fleece designed for compression molding technology. These material with a weight reduced potential and a high design freedom enter different areas for structural application where high mechanical properties are requested.
Product families
Applications
- Chassis & Brake
- Exterior & Body
- Interior
- Powertrain & UTH
- Equipment & Parts
- Refining & Gas Processing
- Power & Utilities
- Renewable Energy
- Aerospace & Aviation
- Marine
- Rail & Mass Transit
Product Families
- Sheet Molding Compounds (SMC)
Other characteristics
- Brand
- RECarbon
- End Uses
- Pipes, Tanks
- Functions
- Molding Compound
- Markets
- Automotive & Transportation
- Industrial
- Technology
- Composite Materials
- Packaging Type
- Rolls
- Composites End Use
- Pipes
- Tanks
- Material Features
- Good Mechanical Properties
- Handling
Store the product in its original sealed packaging at -18°C. Leave product to reach room temperature before unrolling, to prevent condensation. The usual precautions when handling uncured synthetic resins and fine fibrous materials should be observed, and a Safety Data Sheet is available for this product. The use of clean disposable inert gloves provides protection for the operator and avoids contamination of material and components.
- Composite Materials Functions
- Molding Compound
Technical data
Table 1 of 1
9 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| impact strength | 12 | KJ/m2 | ISO 179 |
| Glass Transition Temperature | 150 | °C | ISO 11357-2 |
| Glass Transition Temperature (post-curing) | 200 | °C | ISO 11357-2 |
| Density | 1.47 | g/cm | ISO 1183 A |
| Shrinkage | -0.02 | % | ISO 2577 |
| Tensile Modulus | 30100 | N/mm2 | ISO 527-4 |
| Tensile strength | 210 | N/mm2 | ISO 527-4 |
| Flexural modulus | 33000 | N/mm2 | ISO 14125 |
| Flexural strength | 335 | N/mm2 | ISO 14125 |
