ARMORCOTE® SP
ARMORCOTE® SP - Light stabilized accelerated isophthalic gel coat base with medium reactivity and superior weather resistance.
Properties
- Physical Form
- Liquid
Product families
Applications
- Other Automotive Applications
- Glazing & Window Elements
- Shingles & Tiles
- Fence Decks & Rails
- Interior Fixtures
- Pipes & Plumbing
- Siding & Trim
- Structural Components
- Wall Panels
- Pavement Highways Roads & Bridges
- Marine
Product Families
- Gelcoats & Topcoats
Other characteristics
- Brand
- ARMORCOTE
- Features
Chemical Resistance, Chemical Resistant, Flame Retardant, Good UV Protection, UV Protection
- Functions
- Surface Finish
- Cure
It is recommended to recheck the gel time in the customer's plant because age, temperature, humidity and catalyst will produce varied gel times.
- Markets
- Automotive & Transportation
- Building & Construction
- Technology
- Composite Materials
- Processing Method
Airless or air atomized spray gun equipments. Gel coat delivery rate less than 2.5 pounds/minute with conventional air atomized equipments and less than 4 pounds/minutes with airless equipments.
- Application Methods
Do not over-mix gel coats. Over-mixing breaks down gel coat viscosity, increasing tendencies to sag, and cause styrene loss, which could contribute to porosity. Gel coats should be mixed once a day for 10 minutes. The gel coat should be mixed to the sides and bottom of container with the least amount of turbulence possible. Air bubbling should not be used for mixing. It is not effective and only serves as a potential for water or oil contamination. Do not add any material, other than the amount of recommended methyl ethyl ketone peroxide, to this product without the advice of a representative of CCP Composites Korea.
- Material Features
- Chemical Resistant
- Flame Retardant
- Good UV Protection
- HIGHLIGHTS
- Medium chemical resistance
- Medium heat resistance
- Resilient.
- Handling
Uncatalyzed, this gel coat has a usage life of 120 days from date of manufacture when stored at 23°C or below in a closed, factory-sealed, opaque container, and out of direct sunlight. The usage life is cut in half for every 15°C over 23°C. Totes of product can have even shorter usage life (66% of the drum shelf life mentioned above).
- Recommended Applications
Marine, transportion, Transportation, building industry, etc…
- Composite Materials Functions
- Surface Finish
Technical data
Table 1 of 1
3 rows| Characteristic | Value | Unit |
|---|---|---|
| Gel Time | 11 - 14 | minutes |
| Viscosity at 25°C (Brookfield RVF, spindle No.4 at 4rpm) | 160 - 190 | poises |
| Thixotropic index at 25°C | 5.5 - 6.5 | — |
