To catalogue
SERI PLAST RPP COPO SERILENE NE
- Chemical Family
- PolyolefinsPolypropylenes (PP)
SERI PLAST RPP COPO SERILENE NE is a polypropylene compound obtained from the recovery of industrial scraps. It has a fluidity suitable for injection molding and good thermo-mechanical properties and dimensional firmness.
Properties
- Physical Form
- Granules
- Solid
Product families
Applications
Automotive & Transportation — Automotive
- Exterior & Body
- Interior
Product Families
Plastics — Basic Thermoplastics
- Polyolefins
- Recycled Polymers
Other characteristics
- Density
- 890.0 - 920.0 kg/m³
- Polymer Name
- Polypropylene Compound (PP Compound)
- Labeling Claims
- Contains PIR Resin
- Processing Methods
- Injection Molding
- Usage
It is specially used for automotive applications, where toughness, flexibility and high processability is required.
- Markets
- Automotive & Transportation
- Storage
Material must be stored in dry rooms, at ambient temperature and protected from the direct sunlight.
- PACKAGING
Granules are packaged in big bags of 1200 kg or can be shipped in bulk.
- Technology
- Plastics
- Packaging Type
- Super Sacks
- Working
- Minimun time of Drying
- about 3 hours at 100 °C
- Material Features
- Consistent High Quality
- Dimensional Stability
- Excellent Flexibility
- Good Mechanical Properties
- Good Moldability
- Good Processability
- Good Surface Finish
- Good Toughness
- Certifications and Compliance
- ISO 14001
- ISO 9001
- Plastics and Elastomers End Uses
- Automotive Applications
- Automotive Exterior Parts
- Automotive Interior Parts
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Injection Molding
Technical data
Table 1 of 3
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Melt Flow Index (230°C - 2,16 kg) | 6÷12 | g/10’ | ISO 1133 |
| Density (23°C) | 0.89÷0.92 | g/cm3 | ISO 1183 |
| Ash content (525°C-45') | max. 1 | % | ISO 3451 |
| Moisture (loss in weight) | 0.05 | % | ASTM D6980 |
Table 2 of 3
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Flexural Modulus (2mm/min) | min. 1000 | MPa | ISO 178 |
| Izod notched impact strenght (23°C) | min. 7 | Kj/m2 | ISO 180 |
| Tensile Strength at Yield (50mm/min) | min. 20 | Kj/m2 | ISO 527 |
Table 3 of 3
2 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Heat Deflection Temperature (185 N/cm2) | 50.0 | °C | ISO 75 |
| Vicat 50N | 70.0 | °C | ISO 306 |
