APCO APCO 260-1002 Low VOC Quick Dry Alkyd

Chemical Family: Alkyds

APCO APCO 260-1002 Low VOC Quick Dry Alkyd has High solids, fast drying, thin film, low VOC coating. Provides tight barrier protection to properly prepared steel surfaces. High solids formulation and use of exempt solvents results in lower VOC emissions. Economical way to comply with stricter air quality regulations.

Product families

Ready-to-Use Products — Paints & Coatings

Other Paints & Coatings

Other characteristics

Brand

APCO

Features

Fast Drying, High Gloss, High Solids Content, Low VOC; High Gloss; High solids, VOC complaint; Fast Drying; Can be applied Direct-to-Metal; Available in a full range of colors

Product Type

Solventless & High Solids Coating

Application Method

Brush, Roller, Spray

Compatible Substrates & Surfaces

Metal, Steel

Markets

Paints & Coatings

Application

Pre-application: Flush all equipment with thinner S100
Temperature: Application range from 40°F-110°F surface temperature. Do not apply below 40°F.
Method: Apply one coat maintaining a wet edge to achieve a WFT of 4-6 Mils. Maximum performance will be achieved with two coats totaling 4-6 mils DFT.

Applications

Paints & Coatings — Other Paints & Coatings Applications

Generic Type

High Solids Alkyd

Technology

Ready-to-Use Products

Labeling Claims

Low VOC

Mixing and Thinning

Components: One Mixing: Power mix to uniform color & consistency Thinning: Spray: Up to 12 oz/gal with S100

Application Methods

Brush
Roller
Spray

Packaging and Handling

Unit sizes: One and Five gallon units
Shipping Weight: 11.25 lbs/gal Unit

Ready to Use Product Features

Fast Drying
High Gloss
High Solids Content
Low VOC

Compatible Substrates and Surfaces

Metal
Steel

Technical data

Table 1 of 2

2 rows

Characteristic	Value	Unit	Method
Solids Content	51.0	% by Volume	—
VOC Value	2.4	lbs/gal	EPA Method 24

Table 2 of 2