To catalogue
Extreme™ Plus D
- Chemical Family
- Polyolefins
Extreme™ Plus D is a high performance polyolefin sheet which has been enhanced with a decorative pattern. For those OEMs looking for design flexibility and a desire to differentiate their product with a camouflages, wood grains, marble, stone, graphite look, or custom solid colors Extreme™ Plus D is the most cost effective product in the marketplace for large part thermoforming applications. Extreme™ Plus D is a replacement option for painted surfaces or can act as an adhesion layer for painting TPO substrates.
Properties
- Physical Form
- Sheets
Product families
Building & Construction — Decorative Materials & Finishes
- Wallcoverings & Decorative Laminates
Other characteristics
- Brand
- Extreme
- Density
- 1100.0 - 1100.0 kg/m³
- Features
Good Aesthetics, Good Scratch Resistance, High Melt Strength, High Performance
- Polymer Name
- Thermoplastic Polyolefin (TPO)
- Tensile Modulus
- 2411.5 - 2411.5 MPa
- Markets
- Building & Construction
- Technology
- Plastics
- Product Families
- Plastics — Parts, Shapes & Films
- Quality Standards
- FMVSS 302
- Material Features
- Good Aesthetics
- Good Scratch Resistance
- High Melt Strength
- High Performance
- Key Characteristics
- Molded in decorative pattern or solid colors
- Acrylic cap for scratch and mar protection
- Tough, high impact thermoplastic TPO substrate
- Good UV protection and resistance
- Paint surface without prime coat
- Wide thermoforming process window
- Vibration resistant
- Low CLTE for dimensional stability
- Plastics and Elastomers End Uses
- Laminates
- Plastics and Elastomers Processing Methods
- Thermoforming
Technical data
Table 1 of 1
10 rows| Characteristic | Value | Method |
|---|---|---|
| Specific Gravity | 1.1 | ASTM D-792 |
| Tensile Strength | 2800 | ASTM D-638 |
| Tensile Modulus | 350000 | ASTM D-638 |
| Flexural Modulus | 320000 | ASTM D-790 |
| Mold Shrinkage | 0.007”-0.009” | Internal |
| Izod Impact (Notched at 73° F) | 13 | ASTM D-256 |
| Heat Deflection Temperature (at 66 psi) | 238 | ASTM D-648 |
| Coefficient of Linear Thermal Expansion | 2.4x10⁻⁵ | ASTM D-696 |
| Gardner Gloss (60°) | 0.2 | ASTM D-523 |
| Flammability (Passes) | 0.060" | FMVSS 302 |
