Color Seal II™
- Chemical Family
- Acrylics & Acrylates
Color Seal II™ is a membrane-forming acrylic co-polymer sealer which is sprayed-on fresh colored concrete as a curing compound. It is used instead of water curing or plastic curing sheets which can discolor the slab. Color Seal II™ Keeps water in the slab while it cures which helps prevent cracking and optimizes final hardness. It is also dustproof and seals the surface to protect against water damage and most stains. It is semi-transparent and tinted in 40 different shades to match our color card for integrally colored concrete.
Other characteristics
- Brand
- Color Seal II
- Features
Good Non-Yellowing Properties, Good Stain Resistance, Low VOC, Medium Gloss, Moisture Resistant, Water Resistant, Water-based; Curing Compound and Sealer for Colored Concrete; Color-Matched to Davis Selector™; Renews Old Colored Concrete; Protects against Water Damage, Food and Oil Stains; Blends-In minor surface discolorations; Rejuvenates the appearance of old colored concrete; Semi-Transparent/ Non-Yellowing; Semi-Gloss; Interior/Exterior Use; Easy Clean-Up; Roller or Spray Applied; Water Base, Non-Flammable & Environmentally Safe; Low VOC (60 g/l); Meets 7/1/2006 SCAQMD Rule 1113; Conforms to ASTM C309 Standards
- Product Type
- Sealer
- Application Method
- Roller, Spray
- Compatible Substrates & Surfaces
- Concrete
- Usage
Use: On New Colored Concrete: Apply as a curing compound to prevent rapid evaporation and promote proper slab hydration for strength and hardness. When applied in very thin coat, it is also used to hide minor surface discoloration. Second and third coats are used to completely hide or paint over the concrete. Common concrete applications are for decorative residential and commercial concrete such as driveways, patios, walkways and cart paths in both interior and exterior applications. Use: On Older Colored Concrete: Color Seal II™ is applied in light coats over existing colored concrete to renew the color appearance and seal and protect against moisture damage and most stains. Limitations: Color Seal II™ cannot color uncolored concrete and is not formulated to be used as a paint to completely hide stains or discolorations. Color Seal II™ is not suitable for hostile environments or warehouse floors. Variations in cement, water content and finishing methods may cause color of concrete to differ from color of this sealer. When wet sealed surfaces are more slippery than unsealed surfaces; please add anti-slip or grit additive if used on surfaces that may become wet.
- Color
- White
- Markets
- Building & Construction
- Paints & Coatings
- Storage
Store away from heat sources. Do not allow to freeze as this will damage sealer. Close container after each use. Disposal : Store excess sealer for touch ups. Do not pour down household or storm drain. Take unwanted sealer to household hazmat round-up, authorized disposal site or donate to civic or graffiti clean-up services.
- Warning
Do not take internally. keep out of reach of children. when wet, sealed surfaces are more slippery than unsealed surfaces. not recommended for roadways, pooldecks, kitchen floors or smooth wet pedestrian areas.
- Clean Up
Soap and water promptly after application, before sealer is allowed to dry.
- Coverage
300 square feet/gallon for rough concrete or 400 square feet/gallon for smooth concrete.
- PACKAGING
2 gallon plastic jug (1 per carton). Shipping weight including carton is 18 pounds (8.16 Kg) each. Full pallet shipment is 48 cartons (48 gallons).
- Appearance
Milky colored when liquid. Lighter color when first applied, then dries darker to semi-gloss and semi-transparent finish. Will not yellow or cloud.
Technical data
Table 1 of 1
7 rows| Characteristic | Value | Unit |
|---|---|---|
| V.O.C. Content | 60.0 | g/l |
| Solids Content | 22.0 | % |
| Viscosity (Centipoise, at 20ºC) | 3.0 | — |
| Freezing Point | 32.0 | ºF |
| Flash Point | Non-Flammable | — |
| Weight/Gallon | 8.7 | lbs |
| Volatile | 78.0 | % |
