Intumax EP 102W
- Chemical Family
- Epoxy & Epoxy Derivatives
Intumax EP 102W is a two-part waterborne epoxy intumescent coating. It is engineered to provide a protective coating that combines toughness and wear resistance with low flame spread, low heat transfer and low smoke. In addition, the smoke generated is low in toxicity. The char foam that is formed rises in 20 - 40 seconds. Once this char layer forms, smoke generation is almost entirely eliminated; the burning ceases, and coated surfaces are thermally insulated. Intumax EP102W cures within 24 hours at room temperature to a tack free coating while providing close to 3 hours of working life. For ease of application or for spraying, Intumax EP102W is readily thinned with tap water.
Properties
- Physical Form
- Liquid
Product families
- Protective Coatings
Other characteristics
- Brand
- Intumax
- Features
Good Toughness, Low Smoke Emission, Low Toxicity, Wear Resistant
- Product Type
2K (2 component) Coating, Epoxy Coating, Intumescent Coating, Waterborne Coating; 2K (2 component) Coating; Epoxy Coating; Intumescent Coating; Waterborne Coating
- Application Method
- Spray
- Markets
- Paints & Coatings
- Applications
Paints & Coatings — Other Paints & Coatings Applications
- Technology
- Ready-to-Use Products
- Application Methods
- Spray
- Ready to Use Product Features
- Good Toughness
- Low Smoke Emission
- Low Toxicity
- Wear Resistant
Technical data
Table 1 of 1
10 rows| Characteristic | Value | Unit |
|---|---|---|
| Viscosity (Part - A) | 150,000-200,000 | cps |
| Viscosity (Part - B) | 20,000-25,000 | cps |
| Mix ratio (PART -A) | 100 | pbw |
| Mix Ratio (Part -A) | 100 | pbw |
| solids (PART -A) | 73 | % |
| Mix Ratio (Part -B) | 23.5 | pbw |
| solids content (Part -A) | 73 | % |
| solids content (Part -B) | 100 | % |
| Mix ratio (PART -B) | 23.5 | pbw |
| solids (PART -B) | 100 | % |
