To catalogue
PolyDyne™ 200
PolyDyne™ 200 is a free flowing powdered material that easily disperses in formulations and can provide significant cost savings without sacrificing performance. Its fine particle gives smooth surfaces on extruded rubber parts and may provide longer fatigue life in rubber parts used in a dynamic application than typical crumb rubber. Is considered a “green” material as it is made from end-of-life tires. A free flowing black powder produced from recycled rubber material as defined by ASTM D 5603-01 Grades 1, 2, 3, and 4.
Other characteristics
- Brand
- Lehigh Technologies PolyDyne
- PACKAGING
- Super Sacks: FIBC 2,000 lb & 1,000 lb nominal
- Special moisture-proof if required
- Paper Bags: 30 lbs
- Skid Size: 40 X 48
- Plastic Bags, regular or low melt
- Total Skid Weight: 2,000 lbs./1 Ton
- Bulk containers if required
Technical data
Table 1 of 2
6 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Fiber Content | Max. 0.01 | % | ASTM D5603 |
| Moisture Content | Max. 0.5 | % | ASTM D1509 |
| Polymer RHC | Min. 42 | % | ASTM E 1131-03 (Pyris 1 TGA) |
| Carbon Black | 25-35 | % | ASTM E 1131-03 (Pyris 1 TGA) |
| Metal Content | Max. 0.05 | % | ASTM D5603 |
| Inorganic Material | Max. 11 | % | ASTM E 1131-03 (Pyris 1 TGA) |
Table 2 of 2
2 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Particle Size (Retained 88µ 170 Mesh ) | Max. 1 | % | ASTM D5644-01 |
| Particle Size (Retained 74µ 200 Mesh ) | Max. 10 | % | ASTM D5644-01 |
