Fluon+™ mPPS SB-1030
- Chemical Family
- Polyphenylene Sulfide (PPS)
AGC Chemicals Americas, Inc. Fluon+™ mPPS SB-1030 is a modified PEEK (polyether ether ketone) resin that has been improved using AGC's proprietary fluoropolymer and compounding technology. The modification enhances the impact and wear resistance of the PEEK resin, as well as improves its physical and electrical properties. Fluon+™ mPPS SB-1030 can be processed using conventional PEEK molding methods such as extrusion or injection molding. Potential applications include hoses or tubes, wire and cable, gears, seals, or other markets that require high temperature and chemical resistance.
Product families
Applications
- Consumer Goods — Appliances & Electronics
- Cooling & Climate
- Fuel Systems
- Equipment & Parts
- Jacketing & Insulation
Product Families
- High Performance Thermoplastics
Other characteristics
- Brand
- Fluon+
- Polymer Name
- Polyphenylene Sulfide (PPS)
- Flexural Modulus
- 1900.0 - 1900.0 MPa
- Processing Methods
Compression Molding, Extrusion, Injection Molding
- Markets
- Automotive & Transportation
- Consumer Goods
- Electrical & Electronics
- Industrial
- Processing
Fluon+ mPEEK can be processed via conventional PEEK molding techniques; Extrusion molding; Injection molding; Pressure molding
- Technology
- Plastics
- Material Features
- High temperature resistance
- Flexibility
- Dimensional stability
- Chemical resistance
- Chemical Resistant
- Flexible
- Good Elongation
- Storage and Handling
Heating Fluon® products in excess of 750°F (399°C) can produce toxic fumes. It is, therefore, necessary to provide local exhaust ventilation in areas where Fluon® products are exposed to high temperatures. Avoid breathing fumes or contaminating smoking tobacco with fumes, powder, or dust.. Thermal decomposition of this product will generate hydrogen fluoride, which is corrosive. Corrosion resistance materials are required for prolonged contact with molten resin. Fluon+ mPLASTICS products should be stored in their original containers. This will be either in re-sealable plastic pails, or in drums with the liner bags and chime rings securely re-fastened. Products should be stored indoors at nominal conditions of 23 C and 50% relative humidity. Products should be dried prior to use.
- Safe Use and Handling
A summary of the hazards, as defined by OSHA Hazard Communication Standard, 29 CFR 1910.1200 for this product are: Physical hazards: None; Health hazards: None; FOR ADDITIONAL INFORMATION AND HANDLING INSTRUCTIONS READ AGC CHEMICALS AMERICAS, INC. MATERIAL SAFETY DATA SHEET.
- Plastics and Elastomers End Uses
- Bearings
- Cables
- Electrical Insulation
- Gaskets
- Gears
- Tubes
- Wires
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Compression Molding
- Extrusion
- Injection Molding
Technical data
Table 1 of 1
7 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Flexural Modulus (at 23°C) | 1.9 | GPa | ASTM D790 |
| Flexural Strength (at 23 °C, 5% Strain) | 69 | MPa | ASTM D790 |
| Impact Strength (at 23 °C) | 34 | J/m | ASTM D256 |
| Peak Stress | 6618 | psi | ASTM D638 |
| Tensile Elongation (at 23°C) | 40 | % | ASTM D638 |
| Tensile Strength (at 23 °C) | 6353 | psi | ASTM D638 |
| Yield Stress | 2379 | psi | ASTM D638 |
