To catalogue
Fluon® PTFE G201
- Chemical Family
- Fluoropolymers
AGC Chemicals Americas, Inc. Fluon® PTFE G201 is a virgin sintered granular PTFE homopolymer. It is intended for the extrusion premium quality rods up to approximately 25mm diameter and tubes up to approximately 10mm wall thickness. Resin properties keep the insulation thickness to a minimum while tolerating a wider range of temperatures (-180 °C to 260 °C) than other insulators.
Properties
- Physical Form
- Granules
- Solid
Product families
Applications
Automotive & Transportation — Automotive
- Cooling & Climate
- Fuel Systems
Product Families
Plastics — Engineering & Specialty Polymers
- High Performance Thermoplastics
Other characteristics
- Brand
- Fluon
- Polymer Name
- Polytetrafluoroethylene (PTFE)
- Processing Methods
- Extrusion
- Markets
- Automotive & Transportation
- Disposal
Waste polymer should be disposed of by landfill in accordance with any local regulations for the disposal of products of low toxicity or may be incinerated under approved controlled conditions.
- PACKAGING
G201 is packed in cardboard boxes with two polyethylene liners. Each box contains 25 kg of G201.
- Technology
- Plastics
- Packaging Type
- Boxes
- Plastics and Elastomers End Uses
- Rods
- Tubes
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Extrusion
Technical data
Table 1 of 2
4 rows| Characteristic | Value | Unit |
|---|---|---|
| Bulk Density | 675 | — |
| Die Tube Diameter | 23 | mm |
| Extrusion Pressure | 12.5 - 80 *(but preferably 17 - 35) | Mpa |
| Mean Particle Size | 500 | — |
Table 2 of 2
12 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Diametral Shrinkage | 12 - 12.5 | % | — |
| Elongation (at Break) | 350 | % | ISO 13000-2: 1997 (E) |
| Extrusion Pressure | 31.5 / 320 | MPa / kgf/cm² | — |
| Extrusion Rate | 4.4 / 3.9 | (m/h) / (kg/h) | — |
| Heated Length | 1700 | mm | — |
| Heated Length / Diameter Ratio | 74:1 | — | — |
| Powder Charge Weight | 15 | g | — |
| Ram Dwell Time | 1 | s | — |
| Relative Density | 2.16 | — | — |
| Temperature Profile | 350/400/400/350 | ºC | — |
| Total Cycle Time | 11.2 | s | — |
| Ultimate Tensile Strength | 19 / 195 | MPa / kgf/cm² | ISO 13000-2: 1997 (E) |
