T-Mulz® HP
- CAS Number
- 52628-03-2
- Chemical Name
- 2-Hydroxyethyl methacrylate phosphate
T-Mulz® HP is the phosphate ester of 2-hydroxyethyl methacrylate. It is a reactive monomer that copolymerizes with a wide variety of monomer systems. This product is inhibited with 400 ppm of hydroquinone. It is used to improve latex stability, promote polymer adhesion to various metal substrates, improve film tensile strength, impart antistatic properties to polymers, and improve corrosion resistance.
Properties
- Physical Form
- Liquid
Identification
- Chemical Family
- Methacrylates, Organophosphates, Phosphate Esters, Phosphorous-based CompoundsMethacrylatesOrganophosphatesPhosphate EstersPhosphorous-based Compounds
- CASE Ingredients Features
- Corrosion ResistanceExcellent StabilityGood Anti-Static PropertiesHigh Tensile Strength
- CASE Ingredients Functions
- Monomer
Product families
Applications
- Fluids & Lubricants
Product Families
- Surface Protective Additives
- Monomers
Other characteristics
- Brand
- T-Mulz®
- End Uses
- Industrial Lubricants, Latex
- Synonyms
- 2-Hydroxyethyl 2-methyl-2-propenoate phosphated
- Compatible Substrates & Surfaces
- Metal
- Odor
- Acrylic
- Markets
- Industrial
- Appearance
- Yellow viscous liquid
- Technology
- CASE Ingredients
- Fluids & Lubricants
- Labeling Claims
- Not Listed In California Proposition 65
- Chemical Inventories
- AICS (Australia)
- DSL (Canada)
- ECL (Korea)
- EINECS (EU)
- ENCS (Japan)
- IECSC (China)
- NZIoC (New Zealand)
- PICCS (Phillipines)
- Applications
T-Mulz HP is used to improve latex stability, promote polymer adhesion to various metal substrates, improve film tensile strength and impart antistatic properties to polymers. Improvements in corrosion resistance have been reported, especially when used with phosphate ester surfactants.
- Coating End Applications
- Latex
- Fluids and Lubricants Type
- Industrial Oils & Fluids
- Certifications and Compliance
Comprehensive Environmental Response Compensations & Liability Act (CERCLA); FDA 29 CFR 1910.1200; FEMA Compliant; SARA 311/312
- Fluids and Lubricants End Use
- Industrial Lubricants
- Fluids and Lubricants Functions
- Dispersant
- Compatible Substrates and Surfaces
- Metal
Technical data
Table 1 of 1
10 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| lonogenic Class | Anionic | — | — |
| Moisture Content | max. 1.0 | % | — |
| Activity | min. 99.5 | wt% | — |
| Specific Gravity (at 25°C) | 1.250 - 1.350 | — | — |
| Weight | 10.4 - 11.2 | lbs/gal | — |
| Acid Number (at 5.5 - 9.5) | 190 - 206 | mg KOH/g | — |
| pH (at 1% aqueous Solution) | 1.5 - 2.5 | — | — |
| Flash Point | min. 250 | °F | Pensky Martens Closed-Cup |
| Weight (at 68°F) | 9.4 | lbs/gal | — |
| Surface Tension (at 0.05% Aqueous at 77°F) | 30.7 | dynes/cm | — |
