Polipol 339-TA-LSE-H40
- Chemical Family
- OrthophthalicsPolyestersUnsaturated Polyester (UPE)
Polipol 339-TA-LSE-H40 is a Hand lay-up / Spray-up medium reactivity thixotropic preaccelarated LSE polyster.
Product families
Applications
- Electrical & Electronic Systems
- Exterior & Body
- Interior
- Fence Decks & Rails
- Pools & Landscaping
- Other Industrial Applications
- Medical Devices & Assemblies
- Housings & Enclosures
- Marine
Product Families
- Polyesters
Other characteristics
- Brand
- Polipol
- End Uses
Automotive Applications, Automotive Exterior Parts, Automotive Interior Parts, Electrical Components, Enclosure, Industrial Parts, Marine Applications, Medical Devices
- Cure Method
- Chemical Cure
- Polymer Name
- Thermoset Polyester
- Processing Methods
- Hand Lay-Up, Spray Lay-Up
- Markets
- Automotive & Transportation
- Building & Construction
- Electrical & Electronics
- Healthcare & Pharma
- Industrial
- Cure
- Chemical Cure
- Technology
- Plastics
- Packing Types
You can choose any package type suitable for your production system or you can get further information from our sales department regarding container options.
- Primary Usages
AC units and system components, applications which require mechanical strength such as GRP parts for marine and automotive industry.
- Material Features
- Good Mechanical Properties
- Good Sagging Resistance
- Medium Reactivity
- Thixotropic
- HIGHLIGHTS
- Summer version
- Excellent fiber wet-out
- Low styrene emission
- No sagging on vertical surfaces
- Good mechanical properties
- Optimum HDT
- Spray Applications
Glass fiber roving and catalyzed resins are sprayed on mold surface with a chopper gun. Any air trapped after spraying is released with a roller. Spray-up production steps:
- Hand Lay-up Application
Hand lay-up production methods offer design flexibility, are low cost and a good choice for many producers. It is an ideal method for low quantity part manufacturing. Hand lay-up production methods allow flexibility with part shapes and lamination design and have lower mold costs compared to other production techniques. Additionally, it is possible to obtain desired mechanical properties with different fiber resin ratios. Hand lay-up production steps:
- Plastics and Elastomers End Uses
- Automotive Applications
- Automotive Exterior Parts
- Automotive Interior Parts
- Electrical Components
- Enclosure
- Industrial Parts
- Marine Applications
- Medical Devices
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Hand Lay-Up
- Spray Lay-Up
Technical data
Table 1 of 1
11 rows| Characteristic | Value | Unit |
|---|---|---|
| Viscosity | 600-800 | cps |
| Monomer Content | 41 - 44 | % |
| Flexural Strength | 140 | MPa |
| Tmax | 180 | °C |
| Barcol Hardness, 934 | 48 | Barco |
| Volumetric Shrinkage | 8, 2 | % |
| Tensile Strength | 68 | MPa |
| Gel Time | 38 - 42 | min |
| Elongation at Break Tensile | 2, 2 | % |
| HDT (0,45 MPa] | 86 | °C |
| Remarks | OT1, OT4 | — |
