To catalogue
EMPILON® HA60
EMPILON® HA60 is a blending material based on modified hydrogenated Styrenic block copolymer, with a hardness range from Shore A39 to Shore A85. Its main processing method is double injection or co-extrusion.
Product families
Applications
Applications
- Consumer Goods — Appliances & Electronics; Consumer Goods — Other Consumer Goods Applications
Electrical & Electronics — Devices & Assemblies
- Consumer Electronics
- Other Devices & Assemblies
Product Families
Elastomers — Thermoplastic Elastomers
- Other Thermoplastic Elastomers
Other characteristics
- Brand
- EMPILON
- End Uses
- Handles
- Polymer Name
- Thermoplastic Elastomer (unspecified)
- Processing Methods
Calendering, Coextrusion, Extrusion, Injection Molding
- Color
- Natural
- Markets
- Consumer Goods
- Electrical & Electronics
- Technology
- Elastomers
- Labeling Claims
- Environmentally Friendly
- Halogen-free
- Heavy Metal-free
- Non-Toxic
- Phthalates-free
- Recyclable
- Material Features
- Anti-Slip
- Chemical Resistant
- Excellent Transparency Properties
- Good Mechanical Properties
- Good Weather Stability
- Heat Aging Resistant
- High Resilience
- Hydrolysis Resistant
- Certifications and Compliance
Directive 2011/65/EC amended through EU/2015/863 (RoHS); Waste Electrical & Electronic Equipment Directive (WEEE)
- Plastics and Elastomers End Uses
- Handles
- Plastics and Elastomers Processing Methods
- Calendering
- Coextrusion
- Extrusion
- Injection Molding
- Properties/Injection Molding Information
Please adjust the injection molding temperature based on the product size and mold structure around 180 °C to 220 °C during processing, but not exceeding 240 °C.
Technical data
Table 1 of 1
10 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Specific gravity | 1.03 | — | ASTM D792 |
| Hardness | 61 | Shore A | ASTM D2240 |
| Tensile strength | 85 | kgf/cm2 | ASTM D412 |
| Elongation at Break | 370 | % | ASTM D412 |
| Melt Index | G4 | g/10min | ASTM D1238 |
| ABS Adhesion | 6 | kgf/2.5cm | HT Method |
| PC Adhesion | 8 | kgf/2.5cm | HT Method |
| Brittle Temperature | -40 | °C | Estimate |
| Shrinkage (Reference Only) | 1.4 | % | Machine Direction |
| Shrinkage (Reference Only) | 1.9 | % | Transverse Direction |
