Structuresaver® F1 & F4
Structuresaver® F1 & F4 is a proprietary , non-flammable, fire extinguishing, coating that extinguishes liquid fires as tested in accordance with SFI 54.1. This coating is flexible, ductile, elastomeric and maintains protective integrity in vapor fires. AFES fire extinguishing coating is non-toxic, drain safe, no fuming, water based coating that is suitable for interior and exterior surfaces. There is no primer required and is sprayable with standard equipment. The product has also passed astm E84 flame spread/smoke as a class A coating, as well as ASTM E96 vapor barrier tests.
Product families
- Protective Coatings
Other characteristics
- Brand
- Structuresaver
- Features
- Ductile, Flame Retardant, Flexible
- Product Type
- Elastomeric Coating, Waterborne Coating
- Elastomeric Coating
- Waterborne Coating
- Application Method
- Spray
- Color
- Black
- Grey
- Red
- White
- Markets
- Automotive & Transportation
- Industrial
- Technology
- Ready-to-Use Products
- Labeling Claims
- Non-Flammable
- Non-Toxic
- Safety and Health
In case of skin contact, wash thoroughly with plenty of warm soapy water. In case of eye contact, immediately flush with plenty of water for 15 minutes, and get medical attention immediately. If you experience difficulty breathing, leave the area to obtain fresh air. If continued difficulty is experienced, get medical attention immediately. If swallowed, do not induce vomiting, get medical attention immediately.
Technical data
Table 1 of 3
1 row| Characteristic | Value |
|---|---|
| Environmental Impact | Green product |
Table 2 of 3
10 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Volatiles/Voc | max. 50 | — | — |
| Solvents, Toxicity | None, water based, non-toxic | — | — |
| Weight Per Gallon | 10.6 - 11.2 | lb | — |
| Wet Film/ Dry Film Ratio (Per Coat) | 10:6 | mills | — |
| Coverage Rate (6 ft) | max. 165 | ft²/gal | — |
| Dry To Touch Times (Optimal Conditions) | 2 - 3 | hours | — |
| Recommended Equipment (Airless) | 695 - 2200 | psi | — |
| Sag Resistance (Walls) | min. 35 | mills | — |
| Mold & Fungus Resistance | Excellent | — | ASTM 3273 |
| Spraying Temperature | 550 - 95 | °F | — |
Table 3 of 3
1 row| Characteristic | Value |
|---|---|
| Flame Spread & Smoke (max. 50 seconds) | Class A |
