To catalogue
Skyrol® SW84G (92ga) Polyester
- Chemical Family
- Polyethylene Terephthalate (PET)
Skyrol® SW84G (92ga) Polyester white opaque polyester film with an adhesion promoting chemical treatment on both sides. It provides enhanced adhesion to coatings, inks and adhesives.SW84G is available in a wide range of thickness from 92ga to 1000ga. SW84G film is FDA approved for direct food contact in compliance with FDA 21 CFR 177.1630 (f).
Properties
- Physical Form
- Film
Product families
Printing & Packaging — Packaging
- Food & Beverage Packaging
Other characteristics
- Brand
- Skyrol
- Density
- 1500.0 - 1500.0 kg/m³
- Features
- Food Contact Acceptable, Good Adhesion
- Polymer Name
- Polyethylene Terephthalate (PET)
- Markets
- Printing & Packaging
- Technology
- Plastics
- Labeling Claims
- Food Contact Acceptable
- Product Families
- Plastics — Parts, Shapes & Films
- Material Features
- Food Contact Acceptable
- Good Adhesion
- Certifications and Compliance
- FDA 21 CFR 177.1630
- Plastics and Elastomers End Uses
- Food Packaging
Technical data
Table 1 of 5
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Strength (MD) | 23500 (17) | Kg/mm2 | ASTM D 882 |
| Tensile Strength (TD) | 30000 (21) | Kg/mm2 | ASTM D 882 |
| Elongation At Break (MD) | 130 | % | ASTM D 882 |
| Elongation At Break (TD) | 75 | % | ASTM D 882 |
Table 2 of 5
2 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Heat Shrinkage (MD) (150°C × 30 min) | 1.5 | % | SKC Method |
| Heat Shrinkage (TD) (150°C × 30 min) | 0.6 | % | SKC Method |
Table 3 of 5
2 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Nominal Thickness | 92 (23) | Gauge (μm) | SKC Method |
| Density | 1.5 | g/cm3 | SKC Method |
Table 4 of 5
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Whiteness | 121 | % | ASTM D 1003 |
| Light Transmission | 30 | % | ASTM D 1003 |
| Gloss | 60 | % | ASTM D 523 |
Table 5 of 5
2 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Coefficient of Friction (Kinetic) | 0.3 | μk | ASTM D 1894 |
| Coefficient of Friction (Static) | 0.39 | μk | ASTM D 1894 |
