BRUGGOLEN® M1417
BRUGGOLEN® M1417 is our modifier for both chain build-up and chain disintegration. For example, with its “chain shortener”, the molecular weight of highly viscous polyamide wastes can be transformed into high-performance injection molding types, whose mechanical properties correspond to those of off-the-shelf new injection molded types of the same viscosity. Cost advantages included. BRUGGOLEN® M1417 - Chain Breaking Agent for the recycling of High Viscous Polyamide Waste Controlled and reproducible reduction of molecular weight: Exact adjustment of the relative viscosity to specified target values Upcycling to injection molding grades Generating flow properties and mechanical performance comparable to that of prime material Allowing cost advantages through the usability of scrap and waste material due to the reuse of waste material enabling recycling of cast nylon waste
Properties
- Physical Form
- Granules
- Masterbatch
- Solid
Other characteristics
- Brand
- BRUGGOLEN
- Features
Cost Effective, Excellent Flow Properties, Good Mechanical Properties
- Functions
- Chain Terminating Agent, Viscosity Modifier
- Processing Methods
- Compounding, Injection Molding
- Compatible Polymers & Resins
Polyamide 6 (PA 6), Polyamide 66 (PA 66), Polyamides
- Color
- White
- Dosage
The level of addition of BRUGGOLEN® TP-M1417 is 1.0 - 3.0%, depending on the polyamide source and the desired properties of the finished parts.
- Markets
- Automotive & Transportation
- Building & Construction
- Consumer Goods
- Electrical & Electronics
- Industrial
- Appearance
- Off-white granules
- Processing
The addition to the BRUGGOLEN® TP-M1417 granules is best done by compounding on twin screw extrusion machines. Please note: During compounding on the extruder there will be a decrease in the electrical power take-up as the viscosity drops.
- Shelf LIfe
- 12 Months
- Technology
- Plastics
- Packaging Type
- Bags
- Product Safety
BRUGGOLEN® TP-M1417 is classified and labeled according to the valid CLP regulation. Signal word: Warning; H319 Causes serious eye irritation.; Before commencement of operations a risk assessment must be carried out. To this end, and for ensuring the necessary protective measures, the associated safety data sheet must be noted. In addition, it must be checked whether the stated identified uses resp. specified application conditions in the safety data sheet are met.; The aforementioned remarks are deducted from the European legal system. Deviating or additional regulations in other legal systems must be observed accordingly when using the product.
- Material Features
- Cost Effective
- Excellent Flow Properties
- Good Mechanical Properties
- Storage Condition
If kept properly under standard conditions (sealed, dry, 25°C) the shelf life of BRUGGOLEN® TP-M1417 is at least 12 months.. Protect against direct exposure of heat and moisture.
- Benefits and Features
Adjustment of relative viscosity to levels required for injection molding; Cost advantage as waste material can be used; Generation of flow properties and mechanical performance comparable to that of prime material
- Packaging Information
20 kg alu-lined PE-bags, 40 bags per CP7-pallet (net weight 800 kgs)
- Certifications and Compliance
- ISO 14001
- ISO 45001
- ISO 50001
- ISO 9001
- Compatible Polymers and Resins
- Polyamide 6 (PA 6)
- Polyamide 66 (PA 66)
- Polyamides
Technical data
Table 1 of 1
2 rows| Characteristic | Value | Unit |
|---|---|---|
| Melting Range | 130 - 173 | °C |
| Bulk Density (at 20°C) | approx. 560 | kg/m³ |
