Hauthane HD-2001
- CASE Ingredients Features
- Excellent AdhesionGood Surface FeelingHigh GlossNon-Discoloring
- Chemical Family
- Aliphatics, Polyurethanes (PU)AliphaticsPolyurethanes (PU)
Hauthane HD-2001 is a lightfast, polyester-based, aqueous aliphatic urethane dispersion. It's a soft, highly flexible polymer known for producing an exceptionally dry surface feel.
Identification
- CASE Ingredients Functions
- Binder & Resin
Product families
- Polyurethanes (PU)
Other characteristics
- Brand
- Hauthane
- End Uses
- Hot Melt Adhesive, Thread Coating
- Features
Excellent Adhesion, Good Surface Feeling, High Gloss, Non-Discoloring
- Compatible Substrates & Surfaces
- Nylon, Polyvinyl Chloride (PVC), Textiles
- Drying
Hauthane H0-2001 can be air dried.; If desired, depending on film thickness.; In normal film applications 1 minute at 200°F and 1 minute at 300°F is ample.
- Carrier
- Polyesters
- Resin-based
- Cure
- Air Dry
- Technology
- CASE Ingredients
- Suggested Uses
Hauthane HD-2001 exhibits outstanding adhesion to nylon and PVC.; This polymer can be used in heat seal adhesives, thread coating, and as a general compounding binder with other aqueous polymers and pigments.; Hauthane HD-2001 is also well suited for a variety of adhesive applications including saturation and foam/froth finishing on textiles where a soft hand is required.
- Product Features
Soft and highly extensible; Unexpectedly dry surface feel for a polymer of this softness; Clear, glossy, non-discoloring film; Crosslinkable for improved adhesjon and perfonnance
- Application Methods
- Dip Coating
- Gravure Coating
- Spray
- Applications
Use as supplied by spray, dip, or rotogravure application.. Hauthane HD-2001 can be thickened with appropriate thickeners for knife-over-roll or similar methods.
- Coating End Applications
- Thread Coating
- Compatible Substrates and Surfaces
- Nylon
- Polyvinyl Chloride (PVC)
- Textiles
- Adhesives And Sealants
- Hot Melt Adhesive
Technical data
Table 1 of 2
6 rows| Characteristic | Value | Unit |
|---|---|---|
| Solid Content | 39 - 41 | % |
| Viscosity | 50 - 500 | cPs |
| pH Value | 7.5 - 8.5 | — |
| Density | 8.9 | lbs/gal |
| Softening Point | 265.0 | °F |
| Volatile Organic Compound (as supplied) | 1.23 | lbs/gal |
Table 2 of 2
5 rows| Characteristic | Value | Unit |
|---|---|---|
| Elongation (Tested at 20 Inches/minute) | 550.0 | % |
| Ultimate Tensile Strengh (Tested at 20 Inches/minute) | 6800.0 | psi |
| 100% Modulus (Tested at 20 Inches/minute) | 650.0 | psi |
| 200% Modulus (Tested at 20 Inches/minute) | 910.0 | psi |
| 300% Modulus (Tested at 20 Inches/minute) | 1550.0 | psi |
