Pangel® S9
- Chemical Name
- Sepiolite
- Chemical Family
- Sepiolites, SilicatesSepiolitesSilicates
Pangel® S9 is a highly efficient powder rheological additive made from high-purity sepiolite, suitable for aqueous systems. It serves as a gelling and suspending agent for high and medium-polarity systems. Pangel® S9 consists of highly purified sepiolite with no intentionally added substances. As a natural mineral, it may contain low-level impurities detectable semi-quantitatively via X-ray diffraction (XRD).
Properties
- Physical Form
- Powder
Product families
- Exterior & Body
Other characteristics
- Brand
- Pangel
- Features
Anti-Settling, Cost Effective, Good Gelling Properties, Good Leveling, High Absorption Capacity, Highly Thixotropic, Improved Consistency, Improved Pumpability, Improves Coating Hiding Power , Improves Pseudoplasticity, Microbiological Attack Resistance, Sag Resistance, Stain Resistance, Wide pH Compatibility
- Labeling Claims
- Asbestos-free, High Purity
- Asbestos-free
- High Purity
- Applicable Processes
- Asphalt Waterproofing, Foundry Casting
- Compatible Polymers & Resins
- Acrylics
- Note
¹Suspension at 6%, dispersed at high shear (18 m/s) for 5 minutes; ² Suspension at 3% in water, stirred for 1 min. Syneresis measured after 72 hours.
- Dosage
Recommended addition rate for Pangel® S9 can vary significantly depending on the system, ranging from 0.05% to 2%.
- Markets
- Automotive & Transportation
- Use Levels
- 4.17
- Appearance
- Free-flowing powder
- Conclusion
Pangel® S9 is incorporated to bicomponent epoxy coatings as a post additive in order to adjust the right viscosity while allow easy application with the trowel.; It is indicated in joints and cracks filling, and in corners and in the joint of walls and floor.; Pangel® S9 is introduced in the formula as replacement of fumed silica (i.e. Aerosil 202).
- Shelf LIfe
- 2 years
- Technology
- CASE Ingredients
- Industrial Additives & Materials
- Packaging Type
- Bags
- Product Features
Pangel® S9 is a highly efficient rheological additive based in high purity sepiolite. It is incorporated to the bicomponent epoxy coating as a post additive in order to adjust the right viscosity while allow easy application with the trowel.; It is indicated in joints and cracks filling, and in corners and in the joint of walls and floor.; Pangel® S9 is introduced in the formula as replacement of fumed silica (i.e. Aerosil 202).
- Storage Condition
Stored in dry place protected from humidity and preserved in original package
- Application Methods
- Brush
- Dip Coating
- Roller
Technical data
Table 1 of 5
5 rows| Characteristic | Value | Unit |
|---|---|---|
| Particle Size Distribution (by Laser Diffraction D50) | 8.16 | μm |
| Particle Size Distribution (by Laser Diffraction D10) | 1.52 | μm |
| Particle Size Distribution (by Laser Diffraction D90) | 27.75 | μm |
| Particle Size Distribution (by Laser Diffraction Mean Size) | 11.88 | μm |
| Particle Size Distribution (by Wet Sieving Fraction Retained in 45μm) | 0.1 | % |
Table 2 of 5
8 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Moisture | max. 10.0 | % | — |
| Bulk Density | 30 - 90 | g/l | — |
| Brookfield Viscosity¹ (at 5rpm) | 30,000 - 60,000 | mPa-s | — |
| Particle Size Distribution (by Wet Sieving Residue on 45 μm) | max. 0.5 | % | — |
| pH Value | 8.8 | — | NET-077 |
| Synerisis² | 0 | — | NET-066 |
| Absorption | 290 | — | Dispersed Oil Particulate, NET-068 |
| Surface Area (BET, Nitrogen) | 320 | — | NET-069 |
Table 3 of 5
3 rows| Characteristic | Value | Unit |
|---|---|---|
| Particle Size Distribution (by Wet Sieving Residue on 44μm) | max. 0.1 | % |
| Particle Size Distribution (by Wet Sieving Residue on 10μm) | max. 5 | % |
| Particle Size Distribution (by Wet Sieving Finer than 5μm) | min. 90 | % |
Table 4 of 5
6 rows| Characteristic | Value | Unit |
|---|---|---|
| Sepiolite | min. 85 | % |
| Other Clays | max. 15 | % |
| Sepiolite Clay Mineral | 89 | % |
| Smectite Clay And Mica | 9 | % |
| Feldspars | 1 | % |
| Quartz | max. 1 | % |
Table 5 of 5
2 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Consistency | 123 | KU | — |
| Fineness of Grind | 6 | n° | Hegman |
