Da/Pro Rubber LSR
- Chemical Family
- Silicones
Da/Pro Rubber LSR is the material used in our proprietary liquid injection molding (LIM) process. LSR produces medium to high volume rubber parts more efficiently and economically than other rubber molding processes.
Product families
Applications
- Other Automotive Applications
- Structural Components
- Equipment & Parts
- Other Industrial Applications
- Medical Devices & Assemblies
- Other Parts & Components
Product Families
- Silicone Elastomers
Other characteristics
- End Uses
- Machine/Mechanical Parts, Medical Devices
- Features
Cost Effective, Exceptional UV Resistance, Good Stability, Heat Resistance, Low Compression Set, Ozone Resistant, Water Resistant
- Polymer Name
- Liquid Silicone Rubber (LSR)
- Processing Methods
- Injection Molding
- Markets
- Automotive & Transportation
- Building & Construction
- Electrical & Electronics
- Healthcare & Pharma
- Industrial
- Benefits
Using LSR materials have the following molding benefits:; LSR molding cycle time is measured in seconds, as opposed to minutes by other methods.; LSR molding materials are pre-mixed in a closed system, preventing contamination.; Using LSR in the LIM process produces less scrap from excess rubber molding material than other methods.; The flow properties of liquid silicone rubber make it ideal for molding smaller, tight tolerance parts.; The flow properties of LSR also make it essential to manufacture a precision tool to prevent secondary operations caused by excess flash in the molding process.; LSR is a cured rubber silicone with low compression set, great stability and the ability to resist extreme temperature variations.; LSR components range from medical device valves to gas diaphragms.
- Resistant To
- Medical Solutions
- Water
- UV
- Ozone
- Heat
- Technology
- Elastomers
- Material Features
- Cost Effective
- Exceptional UV Resistance
- Good Stability
- Heat Resistance
- Low Compression Set
- Ozone Resistant
- Water Resistant
- Plastics and Elastomers End Uses
- Machine/Mechanical Parts
- Medical Devices
- Plastics and Elastomers Processing Methods
- Injection Molding
Technical data
Table 1 of 1
2 rows| Characteristic | Value | Unit |
|---|---|---|
| Fire Point | 400 | °F |
| Freeze Point | -80 | °F |
